Best picks

9 Best Heaters for Grow Tents (November 2026)

Updated on · By the GardenNJ team

The best grow tent heaters include the Amazon Basics Ceramic Space Heater for simple room heating, the DREO Space Heater for precise thermostat control, and the Gaiatop Mini Space Heater for tiny desk and seedling spots.

On this page (8 sections)
  1. How to heat a grow tent: the short answer
  2. The best grow tent heaters for different setups
  3. What is the best heater wattage for a grow tent?
  4. What controls should a grow tent heater have?
  5. How should you place a heater and sensor in a tent?
  6. Can a room heater work for a grow tent?
  7. How we compared these heaters
  8. Which grow tent heater should you buy?

The best grow tent heater for most growers is the AC Infinity THERMOFORGE T3, because it combines 10 heat levels, a sensor probe and a hose in one unit.

Choose the VIVOSUN AeroFlux 700W if app and VPD programming matter more, and choose a 1500W room heater if you want to warm the surrounding room instead of the tent interior.

Our score weighs specs, features and buyer feedback against what you're shopping for.

That means wattage, controls, safety features and fit for a tent count more than raw power alone.

Start with grow tent equipment if you are building a setup from scratch.

For the bigger picture, our guide to grow tent heating and cooling explains how heat, light and airflow work together.

Our picks at a glance

  1. 1 Amazon Basics Ceramic Space Heater
    Best for simple room heating

    Amazon Basics Ceramic Space Heater

    9.7/10 our score

    See it on Amazon
  2. 2 DREO Space Heater
    Best for precise thermostat control

    DREO Space Heater

    9.5/10 our score

    See it on Amazon
  3. 3 Gaiatop Mini Space Heater
    Best for tiny desk and seedling spots

    Gaiatop Mini Space Heater

    9.4/10 our score

    See it on Amazon
  1. 4AC Infinity THERMOFORGE T3

    AC Infinity THERMOFORGE T3

    Best for dedicated grow tent control
    Check it
  2. 5Amazon Basics Ceramic Space Heater

    Amazon Basics Ceramic Space Heater

    Best for a small tabletop spot
    Check it
  3. 6WINHL Space Heater

    WINHL Space Heater

    Best for oscillating small-room heat
    Check it
  4. 7VIVOSUN AeroFlux 700W PTC Grow Tent Heater

    VIVOSUN AeroFlux 700W PTC Grow Tent Heater

    Best for app and VPD heating
    Check it
  5. 8Spider Farmer Heater

    Spider Farmer Heater

    Best for day and night temperature zones
    Check it
  6. 9Noarixa Greenhouse Heater with Thermostat

    Noarixa Greenhouse Heater with Thermostat

    Best for damp and covered spaces
    Check it

How to heat a grow tent: the short answer

A grow tent heater should hold a steady setpoint, not blast hot air at plants.

A hose, a probe at canopy height and a thermostat or VPD trigger make that easier.

Learn the setup basics in how to heat a grow tent before you pick a model.

That guide covers placement, sensor height and why lights-off hours are the hardest part.

Why lights-off hours cause the biggest drops

Lights add warmth during the day, and that heat disappears when lights switch off.

Tent fabric also loses heat faster than a room wall because it is thin.

That is why a heater that holds a setpoint overnight matters more than one that only feels strong at first.

Check the room temperature at the coldest hour, not at setup time in the evening.

The best grow tent heaters for different setups

The picks below cover three jobs: heating the tent interior directly, heating the room around the tent, and spot warming a seedling corner. For airflow equipment that can affect tent temperature, see AC Infinity Cloudline fans.

The right choice depends on which job you need.

1

Amazon Basics Ceramic Space Heater: Best for simple room heating

Amazon Basics Ceramic Space Heater, grow tent heaters
9.7/10Our score
  • 1500W high, 900W low, fan only
  • Thermostat control
  • Overheat and tip-over protection
  • 7.52 x 6.34 x 9.45 in, 3 lb

A compact 1500W ceramic heater with three settings and basic safety shutoffs, suited to small tents where you check temperature yourself.

See it on Amazon

Pros

  • Three heat settings
  • Tip-over and overheat protection
  • Compact and portable

Cons

  • Not for humid environments
  • No sensor probe, VPD or hose

This Amazon Basics ceramic heater suits a small tent in a cool room when you want simple heat without a grow controller.

It offers 1500W on high, 900W on low, and fan only for circulation without heat.

At 7.52 x 6.34 x 9.45 inches and 2.8 pounds, it fits on the floor or a table near a tent opening.

That size also means you can move it between a tent, a seedling shelf and a work area.

Overheat and tip-over protection matter inside a tent, where fabric and wiring sit close to any heat source.

It also has a power indicator light, so you can see at a glance whether it is on.

The heater is listed for indoor use and weighs only about 3 pounds in the bullets, so moving it for a different room costs little effort.

Its adjustable thermostat gives you a basic way to hold a range without constant manual switching.

The trade-off is control.

There is no probe, hose, VPD trigger or app, so you must check temperature yourself.

Amazon Basics also warns against humid environments, which is worth noting for a tent that runs wet. For moisture control, compare dehumidifiers for grow tents.

Choose it for a simple room heater you can place outside the tent.

Skip it if you need automated day and night setpoints.

Amazon Basics Ceramic Space HeaterCheck it on Amazon
2

DREO Space Heater: Best for precise thermostat control

DREO Space Heater, grow tent heaters
9.5/10Our score
  • 1500W PTC ceramic
  • 41-95F thermostat in 1F steps
  • Remote, 12-hour timer, ECO mode
  • Tilt detection, ETL certified

A 1500W tower with fine temperature steps and a remote, suited to growers who want on-off cycling without a dedicated grow controller.

See it on Amazon

Pros

  • 1F thermostat steps
  • Remote and timer
  • Tilt-detection sensor

Cons

  • No grow hose or VPD sensor
  • 1500W may cycle often in a small tent

This DREO heater suits growers who want finer thermostat steps than a basic dial gives.

It sets heat from 41F to 95F in 1F increments, with ECO, power heat and fan only modes.

The 1500W PTC system and heat funnel design are built to push warm air farther than a standard heater, according to DREO.

That helps when a heater sits outside a tent and warm air must travel through an opening.

A remote, 12-hour timer, mute, child lock and memory function make it easier to adjust from outside the tent.

The tilt-detection sensor, V0 flame retardant materials and ETL certification add safety layers.

At 6.02 x 6.02 x 10 inches and 3 pounds, it is a small tower that fits beside a tent.

DREO says noise drops to 34dB, which helps in a shared room.

Its 200 square foot heating coverage claim also helps you judge whether it is aimed at a tent or at the room around it.

The wider temperature range means you can set a low overnight minimum without running full heat.

The trade-off is grow-specific control.

There is no hose, probe or VPD mode, so it heats air rather than managing a canopy climate.

A 1500W unit can also cycle hard in a very small tent.

Choose it for precise on-off temperature control.

Skip it if you want a hose or VPD triggers.

DREO Space HeaterCheck it on Amazon
3

Gaiatop Mini Space Heater: Best for tiny desk and seedling spots

Gaiatop Mini Space Heater, grow tent heaters
9.4/10Our score
  • 500W PTC ceramic
  • 2 second warm-up claim
  • 45 degree tip-over protection
  • 2.6 x 5 x 5 in, 15.84 oz

A very small 500W desk heater for a seedling corner or small tent, where low output and a tiny footprint matter more than whole-tent power.

See it on Amazon

Pros

  • Very compact
  • 500W suits small spaces
  • Tip-over and overheat protection

Cons

  • Too small for most full tents
  • No thermostat range in F listed

This Gaiatop mini heater suits a seedling corner, a desk next to a small tent or a propagation shelf.

At 500W and only 2.6 x 5 x 5 inches, it warms a small zone without taking floor space.

Gaiatop says the PTC ceramic element warms in 2 seconds.

That fast response helps when you need a quick bump in temperature for seedlings rather than all-night tent heat.

Tip-over protection at 45 degrees, overheat protection and V0 fireproof material are listed safety features.

An LED light shows the running status, which helps in a dark tent area.

At 15.84 ounces, it is easy to move between shelves.

That portability matters for seed starting, where you may move a heater as trays move.

The unit is listed as a tabletop mount for desk use, which fits its intended spot warming role.

In practice that means it works best close to seedlings and poor at heating air across a room.

The trade-off is power.

500W will not hold a full-size tent on a cold night, and there is no listed thermostat range, hose or VPD control.

With no fine thermostat steps, you will need a separate thermometer to avoid overshooting a small space.

It is a spot heater, not a whole-tent heater.

Choose it for a tiny seedling spot.

Skip it for a 4x4 tent or larger in winter.

Gaiatop Mini Space HeaterCheck it on Amazon
4

AC Infinity THERMOFORGE T3: Best for dedicated grow tent control

AC Infinity THERMOFORGE T3, grow tent heaters
9.2/10Our score
  • 530W PTC, 10 heat levels
  • VPD and temperature triggers
  • Sensor probe and 4 ft hose extension
  • UIS controller integration

A heater built for grow tents with 10 levels, a probe and a hose, suited to growers who already use climate controllers.

See it on Amazon

Pros

  • 10 levels with PWM control
  • Hose directs heat
  • VPD triggers

Cons

  • 530W may be light for large cold tents
  • Needs controller for full features

This AC Infinity THERMOFORGE T3 suits growers who want a heater designed for a tent rather than a living room.

It uses 530W PTC plate technology with 10 distinct heat levels controlled by PWM.

That finer control matters because a tent can overshoot quickly when lights go off.

Ten levels let the heater run at a lower level for longer instead of switching between full heat and off.

The onboard controller, corded sensor probe and flexible hose with a 4 ft extension let you direct heat to a focused area.

A hose also keeps warm air off leaves, which reduces dry spots.

It also integrates with UIS controllers for 0 to 100% output control, according to AC Infinity.

If you already use that system for fans and lights, this keeps heating on the same schedule.

At 5.94 x 11.49 x 12.12 inches and 4.22 kg, it is larger and heavier than mini heaters.

It is a floor unit, so plan floor space before you buy.

The sensor probe and VPD triggers also mean it can respond to humidity changes, not just temperature.

That is useful overnight when transpiration drops and humidity shifts fast.

The trade-off is power and price tier.

530W may be light for a large tent in a cold garage.

Choose it for control, not for maximum wattage.

AC Infinity THERMOFORGE T3Check it on Amazon
5

Amazon Basics Ceramic Space Heater: Best for a small tabletop spot

Amazon Basics Ceramic Space Heater, grow tent heaters
9.0/10Our score
  • 500W ceramic
  • 5.87 x 3.2 x 6 in, 1.4 lb
  • Tip-over protection
  • Single speed

A light 500W mini heater for a table or small tent corner, suited to spot warming rather than heating a full canopy.

See it on Amazon

Pros

  • Lightweight and compact
  • Tip-over protection
  • Simple single-speed use

Cons

  • 500W limits coverage
  • No thermostat or hose

This Amazon Basics mini heater suits a tabletop seedling area or a small tent corner where a full heater would crowd plants.

It is 500W, 1.4 pounds and 5.87 x 3.2 x 6 inches, so it fits where a tower heater will not.

Ceramic coils provide fast heat, according to Amazon Basics.

That quick response suits a propagation shelf that needs a short temperature lift.

Tip-over protection shuts the heater off if it is knocked over.

That feature matters on a table, where a bump from watering or moving trays is common.

Its single speed keeps controls simple.

You place it, turn it on and check temperature with a separate thermometer.

The listed heating coverage of 107.6 square feet helps set expectations for a personal spot rather than a full room.

At 4.17 A, it draws less power than 1500W models, which can help on a shared circuit.

That lower draw is a practical reason to pick a mini heater for a desk or shelf.

The trade-off is control and coverage.

There is no thermostat, hose, timer or VPD mode, and 500W limits how large a space it can hold.

It can also feel warm near plants if placed too close.

Choose it for a small tabletop spot.

Skip it if you need automated setpoints for a full tent.

Amazon Basics Ceramic Space HeaterCheck it on Amazon
6

WINHL Space Heater: Best for oscillating small-room heat

WINHL Space Heater, grow tent heaters
8.8/10Our score
  • 1500W PTC ceramic
  • 70 degree oscillation
  • Remote, thermostat, 12H timer
  • Overheat and tip-over shutoff

A 1500W oscillating tower with a remote and ECO cycling, suited to warming a small room that holds a tent or seedling shelves.

See it on Amazon

Pros

  • 70 degree oscillation
  • Remote and timer
  • ECO thermostat cycling

Cons

  • No hose or VPD control
  • Best near where you sit, per WINHL

This WINHL heater suits a small room that holds a tent, seedling shelves or a workbench.

It delivers 1500W PTC ceramic heat with 70 degree oscillation, so warm air sweeps a corner instead of aiming at one spot.

Oscillation helps when a tent sits in a room, because you can warm the room air around the tent without directing a stream at fabric or plants.

WINHL says it is best within a few feet of where you sit, which also applies to a tent placed nearby.

A remote, thermostat, 12-hour timer and ECO mode let you hold a set temperature with cycling instead of constant full heat.

The remote needs 2 AAA batteries, which are not included.

Overheat and tip-over shutoff add safety for a room with kids or pets.

WINHL says to plug it directly into a wall outlet rated for 15A and never use an extension cord or power strip.

At 5.91 x 5.91 x 9.85 inches, it fits on a desk or nightstand.

That compact tower size helps in a small grow room.

Its five modes and five speeds also give more choice than a single-speed mini heater.

That flexibility helps when you want a low fan setting for circulation overnight.

The trade-off is grow control.

There is no hose, probe or VPD mode.

Choose it for room heating, not for direct canopy control.

WINHL Space HeaterCheck it on Amazon
7

VIVOSUN AeroFlux 700W PTC Grow Tent Heater: Best for app and VPD heating

VIVOSUN AeroFlux 700W PTC Grow Tent Heater, grow tent heaters
8.5/10Our score
  • 700W PTC, 5 levels
  • Sensor for temperature and VPD
  • App control with Day/Night Recipe
  • V0 flame-retardant, tip-over protection

A 700W grow heater with app, VPD tracking and day/night programming, suited to compact tents where you want automated setpoints.

See it on Amazon

Pros

  • 700W for compact spaces
  • App and VPD control
  • Day/Night programming

Cons

  • 5 levels, not 10
  • No hose in included list

This VIVOSUN AeroFlux heater suits compact tents where app control and VPD matter.

It provides 700W PTC heating with 5 adjustable levels, which is more power than 530W grow heaters in this roundup.

A high-precision sensor tracks temperature and VPD in real time and auto-adjusts output, according to VIVOSUN.

That helps support transpiration as humidity changes through the day.

You can set temperature with local controls or fine-tune through the app.

The Recipe feature programs Day/Night Mode, so lights-off hours get a different setpoint than lights-on hours.

At 9.45 x 4.72 x 9.45 inches, it is compact enough for a small tent floor.

V0 flame-retardant materials, tip-over protection and overheat shutoff are listed safety features.

The app also lets you customize minimum temperature and target VPD, which gives you two levers instead of temperature alone.

That can prevent a heater from chasing temperature while humidity moves the other way.

The sleek design also saves growing area in a compact tent.

The trade-off is flexibility.

It has 5 levels rather than 10, and no hose is listed in the included components.

That means you rely on placement and air circulation more than directed heat.

Choose it for app and VPD control in a compact tent.

Skip it if you want a hose for focused delivery.

VIVOSUN AeroFlux 700W PTC Grow Tent HeaterCheck it on Amazon
8

Spider Farmer Heater: Best for day and night temperature zones

Spider Farmer Heater, grow tent heaters
8.3/10Our score
  • 530W PTC, 10 levels
  • Dead zone control, 3F default
  • 160cm hose, 24H timer
  • Day, night and all-day modes

A 530W grow heater with a long hose and day/night modes, suited to growers who want stable heat without frequent on-off switching.

See it on Amazon

Pros

  • 10 levels and dead zone
  • Long hose avoids direct blowing
  • 24H countdown timer

Cons

  • 530W may be light for large tents
  • Panel shuts off after 30 seconds idle

This Spider Farmer heater suits growers who want stable heat with day and night setpoints.

It uses 530W PTC heating with 10 levels for temperature and fan speed, plus PWM control.

A temperature zone design with a built-in dead zone avoids frequent switching.

The default dead zone is 3F, with heat on at set temperature minus 3F and off at plus 3F, according to Spider Farmer.

That dead zone matters for plant stability.

Rapid on-off cycling can swing temperature and humidity, while a dead zone lets the tent drift a little before heat kicks in again.

The heater includes an adjustable 160cm hose, which helps avoid direct blowing on plants.

A 24-hour countdown timer, normal open mode, all-day mode, daytime mode and night mode add scheduling options.

At 12 x 12 x 6.3 inches and 5.4 pounds, it needs more floor space than mini heaters.

The panel shuts off after 30 seconds of inactivity, which helps keep a dark environment at night.

The built-in sensor updates every 10 seconds and the display alternates set and real time temperature.

That frequent update helps you see whether the dead zone is holding steady.

You can also adjust the dead zone to 1F if you want tighter control.

The trade-off is power.

530W may be light for a large tent in a cold space.

Choose it for stable zoning, not for maximum heat.

Spider Farmer HeaterCheck it on Amazon
9

Noarixa Greenhouse Heater with Thermostat: Best for damp and covered spaces

Noarixa Greenhouse Heater with Thermostat, grow tent heaters
8.0/10Our score
  • 1500W PTC, 20/750/1500W settings
  • 5-42C thermostat
  • IPX4 rating
  • 160 sq ft coverage claim

A 1500W heater with IPX4 rating and a wide thermostat range, suited to a damp garage, greenhouse or covered area holding a tent.

See it on Amazon

Pros

  • IPX4 for damp areas
  • Wide thermostat range
  • Three heat settings

Cons

  • No VPD, probe or hose
  • 1500W needs a dedicated circuit check

This Noarixa heater suits a damp garage, greenhouse or covered area that holds a tent.

It outputs 1500W with 20W, 750W and 1500W settings, and Noarixa says it covers about 160 sq ft.

A thermostat range of 5C to 42C lets it switch on and off to hold a chosen range.

That wide range suits seed trays, young plants and winter care, where you may want a low minimum temperature.

An IPX4 rating and flame-resistant shell are listed for damp patios, greenhouses and humid growing environments.

A thermal cut-off powers it down if it becomes too hot.

At 6.5 x 9 x 12 inches with a carry handle, it is easy to move between a tent, a seedling room and a drying area.

No tools or assembly are needed, according to Noarixa.

The digital display, on-off timer and adjustable temperature help with overnight use.

Those controls make it more than a simple on-off heater for a garage setup.

The 20W low setting is also useful for a very small bump in temperature.

The trade-off is grow control.

There is no VPD sensor, probe or hose, and no app.

It heats air in a space rather than managing a canopy climate.

Choose it for a damp or covered space.

Skip it if you need VPD triggers or directed heat.

Noarixa Greenhouse Heater with ThermostatCheck it on Amazon

What is the best heater wattage for a grow tent?

Use 500W for a seedling corner, 530W to 700W for a compact tent, and 1500W for a colder room or larger tent.

Tent size, room temperature and insulation change the answer more than any single wattage rule.

How to size a heater for a small tent

A 530W to 700W grow heater suits a compact tent in a heated room.

That range gives you enough power to lift temperature at night without constant cycling.

Place the sensor at canopy height.

A probe near the floor reads cooler than the air around leaves, so the heater may run too long.

Also consider how often lights are on.

A tent with lights on for long hours needs less overnight heat than one on a short cycle.

How to size a heater for a cold room

A 1500W room heater suits a tent in a cold garage or basement.

It heats the room air first, then the tent holds that warmth better.

Check circuit load before you run a 1500W heater for long hours.

WINHL warns to plug directly into a 15A wall outlet and avoid sharing the circuit.

If the room is very cold, heating the room first can also reduce the load on a smaller tent heater.

That two-step approach can give steadier results than pointing a large heater at a tent opening.

What controls should a grow tent heater have?

A thermostat is the minimum, while a probe, hose and VPD trigger give the steadiest results.

Simple heaters cycle on temperature alone, and grow heaters can respond to humidity too.

Thermostat vs VPD control

A thermostat holds a temperature setpoint.

VPD control uses temperature and humidity together, so heat can change when humidity shifts even if temperature looks stable.

That matters at night, when lights-off cooling and plant transpiration can move humidity fast.

VPD tracking helps avoid heating that swings humidity the wrong way.

Why a hose helps

A hose directs warm air to a zone instead of blowing across leaves.

AC Infinity and Spider Farmer both include hoses for that reason.

Direct blowing can dry leaf edges and create hot spots.

A hose at low speed spreads heat more evenly.

Timers and day/night modes

Timers let you set different targets for lights-on and lights-off hours.

That matters because plants transpire more when lights are on.

A single setpoint for all day can leave the tent too warm or too cool at night.

Day and night modes help you match heat to plant activity.

How should you place a heater and sensor in a tent?

Place the heater low, aim the hose away from leaves, and put the sensor at canopy height.

That setup gives the probe the air your plants actually feel.

Keep the heater away from fabric, wiring and foliage.

Tip-over and overheat protection help, but placement still matters.

Run a circulation fan so warm air mixes instead of pooling near the heater.

Check by feel and thermometer readings at canopy height, not only at the heater.

For more placement detail, see best grow tent insulation if your tent loses heat through walls.

Insulation can reduce how hard any heater must work.

What to check after the first night

Check temperature at canopy height just before lights come on.

That reading shows whether the heater held the setpoint through the coldest hours.

Also check whether leaves near the hose look dry or curled.

If they do, move the hose farther away or lower the fan speed.

Can a room heater work for a grow tent?

Yes, if you heat the room around the tent and monitor tent temperature separately.

A room heater is simpler and often cheaper, but it lacks a probe, hose and VPD triggers.

Use a separate thermometer inside the tent at canopy height.

That tells you whether room heat is enough on the coldest nights.

A room heater also avoids direct blowing inside the tent.

That can be a plus for seedlings or plants that dislike moving air.

If you want finer control, our best grow tent heater with thermostat guide compares models built around that feature.

How we compared these heaters

We compared wattage, heat levels, thermostat range, sensor and VPD features, hose options, size, weight and safety features.

We also checked included parts, timers and app or controller support.

We looked at which models are built for tents and which are room heaters used near tents.

That split matters because a grow heater may use less wattage but hold a setpoint better.

We checked buyer patterns in the data we reviewed, including mentions of noise, cycling and size.

We did not test any heater.

How to read the scores

Scores weigh control features heavily for tent use.

A heater with a probe and hose scores well even at lower wattage.

A 1500W room heater scores well for room heating but less for canopy control.

Size and weight also affect the score because floor space is limited in many tents.

Which grow tent heater should you buy?

Pick the AC Infinity THERMOFORGE T3 for dedicated tent control, the VIVOSUN AeroFlux 700W for app and VPD programming, and a 1500W room heater for heating the space around a tent.

Pick a 500W mini heater only for a seedling corner or tabletop spot.

If you grow houseplants near your tent, pair heating with light checks.

See best grow lights for spider plants and how to grow spider plants indoors for that setup.

For the next step, read how to heat a grow tent and set your sensor at canopy height before your first cold night.

Our top 3 picks at a glance

  1. 1 Amazon Basics Ceramic Space Heater
    Best for simple room heating

    Amazon Basics Ceramic Space Heater

    9.7/10 our score

    See it on Amazon
  2. 2 DREO Space Heater
    Best for precise thermostat control

    DREO Space Heater

    9.5/10 our score

    See it on Amazon
  3. 3 Gaiatop Mini Space Heater
    Best for tiny desk and seedling spots

    Gaiatop Mini Space Heater

    9.4/10 our score

    See it on Amazon

Frequently asked questions

What wattage do I need for a grow tent heater?

Match wattage to tent size, room temperature and insulation rather than a single rule. A 500W mini heater suits a seedling corner, while 530W to 700W grow heaters suit compact tents.

A 1500W room heater suits a colder room or larger tent, but check power draw and cycling first.

Can I use a regular space heater in a grow tent?

You can heat the room around a tent with a regular heater, but direct blowing inside a tent can dry plants and swing temperature. Grow heaters with a hose, probe and VPD control give steadier results.

Keep any heater away from fabric, wiring and foliage, and follow its safety limits.

What is VPD control on a grow tent heater?

VPD control lets a heater respond to vapor pressure deficit, which combines temperature and humidity. A sensor tracks both, so heat output can change as humidity changes.

That matters at night, when lights-off cooling can shift readings quickly.

A probe placed at canopy height gives a truer reading than a probe near the floor.

Do I need a thermostat or a hose for a grow tent heater?

A thermostat helps avoid overheating, and a hose helps spread heat without blasting plants. Simple room heaters often have a thermostat but no hose or probe.

Dedicated grow heaters often add both, plus timers and day/night modes.

Choose based on tent size and how closely you want to hold temperature.