Rooting Hormone Powder vs Gel: Which Should You Use? (November 2026)
Choose powder for tough woody cuttings and gel for soft, easy cuttings you handle often. Rooting hormone powder or gel works by coating the cut end with IBA, so match the form and strength to your plant first.
On this page (11 sections)
- Rooting hormone powder or gel, side by side
- Contact on the cut end decides a lot
- IBA strength matters more than form
- Which plants suit powder best?
- Which plants suit gel best?
- Handling and mess in daily use
- Storage and shelf life habits
- Cost per cutting over time
- Health, safety and clean habits
- Who should buy which form?
- The verdict on rooting hormone powder or gel
Choose powder for tough woody cuttings and gel for soft, easy cuttings you handle often. Rooting hormone powder or gel both deliver IBA to the cut end, so your plant type should decide the form and strength.
A rooting hormone spray guide covers another application format.
Hormex #8 powder carries 0.80% IBA for semi-hardwood cuttings. Hormex #16 powder carries 1.60% IBA for difficult hardwood cuttings.
Clonex gel is a 100 ml water-based gel made for soft tissue plants. MidasHydro gel carries 0.35% IBA in a 4 fluid ounce container.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared product details and plant guides rather than testing cuttings by hand.
If you are new to propagation, start by learning what is rooting hormone for plants. That background explains IBA before you choose a strength.
Rooting hormone powder or gel, side by side
Powder wins on strength choice and storage; gel wins on contact and ease of use. For another application method, compare liquid rooting hormone options.
Powder comes in several IBA strengths, while gel coats the stem and stays put.
Hormex makes powder at 0.10%, 0.30%, 0.80% and 1.60% IBA. That range covers pothos and coleus at the low end and sugar maple and Hollywood juniper at the high end.
Clonex gel uses a water-based formula with IBA for soft tissue plants. MidasHydro gel uses 0.35% IBA, a mid-level strength for a range of plants.
| Feature | Powder | Gel |
|---|---|---|
| IBA strengths here | 0.80% and 1.60% | 0.35%, plus Clonex formula |
| How it sticks | Dry coat on a moist end | Thick coat that clings |
| Best plants | Semi-hardwood and hardwood | Soft tissue plants |
| Storage | Dry and capped | Capped, keep clean |
| Main risk | Powder falls off | Contamination in the jar |
Powder suits a grower who roots many plant types and wants strength steps. Gel suits a grower who roots soft stems often and wants a fast, even dip.
Our best rooting hormone for cuttings guide covers strengths across brands. Use it to check a plant before you buy.
Contact on the cut end decides a lot
Gel keeps IBA in contact longer; powder needs a moist end and quick planting. Contact time matters because the hormone must reach living tissue at the base.
Clonex says its gel holds proper contact with the target area on a fresh cutting. That thick coat stays in place when you push the stem into a medium.
Powder needs a different routine. Hormex directs you to dip in liquid or clean water first, coat the end, and plant it while the coat holds.
A dry powder coat can shed if you handle the stem or push it deep into a medium. Tap off excess and place the stem promptly.
Gel has the opposite problem. It sticks well, so a thick coat can stay on the stem even when you want a thinner layer.
For soft stems, that cling is a real advantage. For woody stems, powder gives you more control over strength.
Learn the full routine in our guide on how to use rooting hormone on cuttings. The steps differ a little by form.
IBA strength matters more than form
Match IBA strength to the cutting first; form comes second. A weak product on tough wood will underperform, and a strong product on a tender stem can overwhelm it.
Hormex #8 uses 0.80% IBA. Hormex points to azalea, grape and fiddle leaf fig as examples for that level.
Hormex #16 uses 1.60% IBA. That level targets difficult hardwood cuttings from selected trees and woody shrubs.
MidasHydro gel uses 0.35% IBA. The maker calls it a balance for different types of plants, and it sits between tender and woody needs.
Clonex does not state a percentage in its product details here. It describes a water-based formula with the ideal level of IBA for soft tissue plants.
If your plant needs a specific strength, powder gives you a clear number to match. If you root mostly soft stems, a gel with a mid-level strength may be enough.
Check the plant strength guide for your variety before you choose. Hormex ties each strength to examples such as rose, hoya and gardenia at 0.30% IBA.
Which plants suit powder best?
Powder suits semi-hardwood and hardwood cuttings that need a clear strength step. Woody stems have firm tissue that holds a dry coat well.
Hormex #8 is made for semi-hardwood plants, medicinal plants and tree cuttings. Examples include azalea, grape and fiddle leaf fig.
Hormex #16 is made for difficult woody varieties, tough evergreens, conifers and junipers. Those plants often need the highest strength in the range.
Powder also works in rockwool, coco, peat moss and soil. Rooting cubes pair well with a powder dip for a steady fit around the stem.
The dip method is simple. Cut a 3 to 8 inch stem at 45 degrees below a node, remove lower leaves, and coat the base.
Keep heat and humidity steady after planting. Hormex links that routine to faster root growth and healthier starts.
Powder is less forgiving with soft stems. A tender cut end can bruise or shed the coat before it reaches the medium.
Which plants suit gel best?
Gel suits soft tissue plants and home growers who take many cuttings. The thick coat is easy to see and hard to knock off.
Clonex gel is aimed at soft tissue plants across a wide range of types. You dip the cutting, insert it into a rooting medium, then mist and keep it warm and moist.
MidasHydro gel is aimed at professional and home based growers. Its 4 fluid ounce jar is made for taking hundreds of clones, according to the maker.
Gel also helps when you work in a small space. A dip jar takes less room than a tray, a scoop and a dry powder setup.
A propagation station keeps cuttings, medium and labels in one place. Gel fits well into that routine because the dip takes seconds.
Gel is not a strength ladder. You get one formula, so you cannot step up to 1.60% IBA for a tough juniper with the same jar.
For rose cuttings, our best rooting hormone for rose cuttings guide matches strength to that plant. Rose sits at a mid-level in the Hormex guide.
Handling and mess in daily use
Gel is cleaner to apply; powder is cleaner to store. That trade-off decides which form you will reach for each week.
Gel coats the stem in one dip and drips less on your bench. You can see the coat, so you know the base is covered before you plant it.
Powder dusts. It can spill on a bench, coat your fingers, and fall off a stem that you bump on the way to the medium.
Hormex warns not to return unused powder to the bottle. That rule keeps moisture and plant matter out of the supply.
Gel has its own hygiene rule. Never return a dipped stem to the jar, and keep tools clean between plants.
Powder wins on spill cleanup because dry powder is easy to sweep up. Gel wins during the dip because it stays where you put it.
If you root cuttings daily, gel may feel faster. If you root monthly, powder may feel simpler to keep.
Storage and shelf life habits
Dry powder stores with less worry; gel needs a clean, capped routine. Water in gel makes hygiene part of every use.
Clonex gel is water-based. That formula helps it cling, but it also means a dirty dip can spread through the jar.
Keep gel capped, work with clean hands and tools, and dip only fresh cut ends. Store it as its label directs.
Powder has no water to support contamination. Keep it dry, capped, and away from wet stems and fingers.
Hormex powder weighs 21.27 g for #8. That small bottle is easy to keep in a drawer or propagation area.
MidasHydro gel comes in a 4 fluid ounce container. Clonex gel comes in 100 ml.
Both sizes suit a home grower who roots often.
Do not return unused powder to the bottle. That one habit protects the whole supply.
Cost per cutting over time
Powder often stretches further for occasional use; gel can win for daily cutting runs. Volume and waste shape the real cost.
A 21.27 g bottle of powder coats many stems because you use a thin dry layer. You lose some powder to taps and spills, but each dip uses little material.
A 100 ml or 4 fluid ounce gel jar also coats many stems. MidasHydro says you can get hundreds of clones from one jar.
Gel waste happens when you dip dirty stems or leave the cap off. Powder waste happens when you spill or return coated stems to the bottle.
Buy powder if you root a mix of plants a few times a month. Buy gel if you root batches every week and want speed.
Our best rooting hormone gel for cuttings guide compares gel options in more detail. Read it if gel is your likely choice.
Health, safety and clean habits
Treat both forms as plant chemicals, not kitchen items. IBA products belong in a capped container, out of reach of children and pets.
Wash your hands after handling. Avoid contact with eyes and food surfaces, and keep powder and gel away from edible produce.
Use a clean tool for each batch. A dirty blade can carry plant matter into the hormone and into the medium.
Remove lower leaves before you dip. Leaves in the medium can rot and invite problems around a fresh cut end.
Keep heat and humidity steady after planting. Stressed cuttings root slowly with any form of hormone.
Some readers prefer plant-based options. Our guide to rooting hormone natural options explains what to look for.
It also explains the limits of home mixes.
A rooting hormone paste is a third form worth knowing. Paste clings like gel but often comes in a firmer texture for woody stems.
Who should buy which form?
Buy powder for woody plants and strength control; buy gel for soft plants and fast dipping. Your plant list should make the call.
Hormex Rooting Hormone Powder #8: Best for semi-hardwood cuttings
- Powder form
- 0.80% IBA
- 21.27 g
- Dip application
A 0.80% IBA powder for semi-hardwood and moderately difficult cuttings, including azalea, grape and fiddle leaf fig.
Pros
- Strength matches woody cuttings
- Shelf-stable powder form
- Works in soil, coco, peat and rockwool
Cons
- Powder can fall off before planting
- Stronger than softwood cuttings need
Hormex #8 powder at 0.80% IBA suits semi-hardwood cuttings such as azalea, grape and fiddle leaf fig. It is the middle step in a four-strength system.
Choose it if your collection is mostly woody shrubs and houseplants with firm stems. The powder form stores dry and works in soil, coco, peat and rockwool.
Hormex Rooting Hormone Powder #16: Best for tough hardwood cuttings
- Powder form
- 1.60% IBA
- Dip application
- Hardwood cuttings
A 1.60% IBA powder for difficult hardwood cuttings from selected trees and woody shrubs.
Pros
- Highest IBA strength in this comparison
- Made for hardwood and conifers
- Dip method suits a firm cut end
Cons
- Too strong for tender stems
- Powder needs quick placement in the medium
Hormex #16 powder at 1.60% IBA suits tough hardwood cuttings. It is the top step for selected trees, conifers and junipers.
Choose it only if your plants need that strength. Tender stems do not need 1.60% IBA, and a stronger coat does not help them root faster.
Clonex Rooting Gel High-Performance Rooting Compound: Best for soft tissue cuttings
- Gel form
- 100 ml
- Water-based formula
- Contains IBA
A 100 ml water-based gel that clings to soft tissue cuttings and keeps IBA in contact while they root.
Pros
- Stays on the stem after dipping
- Suits soft tissue plants
- Even coat with a simple dip
Cons
- Gel container can introduce contamination
- One strength for all plant types
Clonex gel in a 100 ml container suits soft tissue plants. Its water-based gel clings to the cut end and keeps IBA in contact.
Choose it if you root soft stems in batches and want a clean dip with no powder dust. Mist the cuttings and keep them warm and moist after planting.
MIDASHYDRO PRODUCTS Rooting Hormone for Cuttings: Best for value gel in a large jar
- Gel form
- 0.35% IBA
- 4 fluid ounces
- Dip application
A 4 fluid ounce gel with 0.35% IBA for home growers who take many cuttings and want a larger container.
Pros
- Large container for many cuttings
- 0.35% IBA suits a wide range
- Gel clings to the cut end
Cons
- Mid-strength IBA may not suit very tough wood
- Gel form needs clean dipping habits
MidasHydro gel at 0.35% IBA in a 4 fluid ounce jar suits home growers who take many cuttings. It is a mid-level gel for a range of plants.
Choose it if you want a larger gel container and a single formula for most of your propagation. Keep dipping habits clean to protect the jar.
The verdict on rooting hormone powder or gel
Pick powder for semi-hardwood and hardwood cuttings, and gel for soft tissue cuttings. Strength first, then form, then price.
Hormex #8 at 0.80% IBA is the best fit for moderately difficult woody cuttings. Hormex #16 at 1.60% IBA is for the toughest hardwood cases.
Clonex gel is the best fit for soft tissue plants and frequent dipping. MidasHydro gel at 0.35% IBA is the best fit for a large home supply.
If you only root pothos, coleus and similar tender plants, gel is likely enough. If you root azalea, juniper and fiddle leaf fig, powder gives you the strength steps you need.
Learn the dip routine before you buy. Then match the form to the plants you actually grow.
That choice will matter more than the brand on the label.
Frequently asked questions
Is rooting hormone powder or gel better?
Powder is better for woody and hardwood cuttings that need higher IBA strengths, while gel is better for soft tissue cuttings because it clings to the stem. Your plant type matters more than the form alone, so match strength first and form second.
Can you use too much rooting hormone?
Yes, too much IBA can overwhelm tender stems. Use the strength matched to your plant, dip only the cut end, and tap off excess powder.
Softwood plants need less hormone than semi-hardwood or hardwood cuttings.
How do you keep rooting gel clean?
Dip clean cut ends only, keep the container capped, and avoid returning dipped stems to the jar. Work with clean tools and fresh medium, and store gel as its label directs.
Contamination is the main risk with any shared gel container.
Which form lasts longer in storage?
Dry powder generally stores more simply than gel because it has no water to support contamination. Keep powder dry, capped and away from wet hands.
Gel needs a cap kept on and clean dipping every time.
About this guide: Our look at rooting hormone powder or gel draws on maker specs, materials and what owners report. See how we research.



