9 Best Under Canopy LED Grow Lights (November 2026)
The best under canopy LED grow lights include the Barrina T5 Grow Lights for long plant shelves, the FECiDA Dimmable LED Grow Tent Light for dimmable 2x2 coverage, and the Uallhome 2 Pack LED Grow Light Panel for broad tent supplementation.
On this page (5 sections)
The best under canopy LED grow lights help fill shaded lower foliage without forcing one overhead fixture to do every job. VIVOSUN is the strongest dedicated pick here, while Barrina, FECiDA and Uallhome offer useful alternatives for shelves, panels and larger supplemental layouts.
This guide is for growers who notice a clear gap between bright upper leaves and pale, thin growth below. An overhead light can be strong at the top and still leave the inside of a dense canopy short of usable light.
That gap often shows up in daily care rather than in a quick look from above. Lower leaves may stay small, lose colour, or drop, even while the top of the plant looks full and active.
Under canopy lighting works differently from simply raising the main fixture. It places support light closer to the shaded zone, so lower leaves can contribute instead of relying only on reflected light from the floor or tent walls.
That approach suits a few common setups. Shelf growers need short strips, tent growers need bars that can run along lower walls, and room growers may need a fixture that aims at one plant corner.
It also suits plants that fill out quickly and start shading their own lower growth. In that case, the issue is often placement and reach, not only total power from above.
We compared the listed power, coverage, spectrum, mounting options, controls and included accessories. Each pick was checked against the product data for its stated area, draw and fittings, rather than against general claims.
That check matters because a fixture for a 2x2 ft tent, a long shelf and a 4x4 ft space cannot be judged in the same way. The right form of light depends on where the shaded area sits and how the fixture can be secured.
For a broader look at plant lighting, see our guide to Best Grow Lights For Cannabis and our overview of What Plants Grow Best Under LED Grow Lights?.
Use those guides to check whether your main light already suits the plant type. Then use this roundup to decide where the extra light should sit and how it should be controlled.
A dedicated under canopy bar is often the neatest option in a tent. A panel, track light or shelf strip can be a better match when the shaded area is wider, narrower or outside a tent frame.
For open rooms, a fixture that can be aimed or moved may be easier to live with than a fixed bar. For shelves, short linked strips can follow the shape of the rows without taking much depth.
The trade-off is that supplemental light adds another cord, another control and another thing to position as plants grow. That extra step is worth it only when lower foliage is clearly missing light.
Start by looking at the weakest part of the plant and noting whether it needs a long, narrow, broad or targeted source. That simple check will narrow the choice far more than wattage alone.
Our picks at a glance
-
1
-
2
Best for dimmable 2x2 coverageFECiDA Dimmable LED Grow Tent Light
9.4/10 our score
See it on Amazon -
3
Best for broad tent supplementationUallhome 2 Pack LED Grow Light Panel
9.3/10 our score
See it on Amazon
- 4
Check itVIVOSUN LumaRay Under Canopy Grow Light
Best for smart tent control - 5
Check itELUFAH 48W Under Canopy LED Grow Light
Best for floor-mounted plants - 6
Check itSAMPHON 600W LED Grow Lights for Indoor
Best for large 4x4 layouts - 7
Check itMARS HYDRO ADlite Red30 & Blue30 Led
Best for stage-specific spectrum - 8
Check itBarrina TR40A Track Grow Lights
Best for targeted room lighting - 9
Check itHHNMAHN 120W LED Grow Light Full Spectrum
Best for compact hanging coverage
The best under canopy LED grow lights by setup
The best choice depends on how much shaded area you need to cover and where the fixture can sit. Dedicated bars fit below a canopy, while panels and track lights can solve wider or more targeted lighting gaps.
Start by marking the weak zone before you compare fixtures. A single lower branch needs a different shape from a whole row of plants along a tent wall.
Note the height of the shaded leaves as well as their width. A light that sits at the wrong height can shine under the problem leaves or hit them too directly.
Dedicated under canopy bars suit close, low placement. Their long form spreads light along the plant instead of creating one bright spot.
That shape is helpful in a tent, where a bar can run beside a row and give each plant a more even share. It also keeps the light close to the lower zone without filling the whole tent.
Panels suit broader areas where a bar would leave gaps at the ends. They can sit beside, above or below the canopy, depending on the frame and hanging points.
A panel is often easier to position for a small group of plants that need wider coverage. The trade-off is a larger footprint and a need for secure hanging or support.
Track and shelf lights suit rooms and open shelving. They help when the problem is a plant corner or lower shelf rather than the inside of a tent.
A track style fixture can be aimed at a specific plant, which makes it useful for a statement plant or a plant wall. Shelf strips can run under each shelf level and support rows of smaller pots.
Mounting should decide the shortlist as much as power. A fixture that cannot be secured at the right height or angle will not help, even if its stated coverage looks generous.
Think about access too, because plants grow and need training, pruning and watering. A fixture that is hard to move will soon be in the wrong place.
Also think about daily routine, since cords and controls need room around pots and trays. A tidy setup on day one can become awkward once the plants fill the space.
For a tent, check whether the frame can hold the chosen mount without blocking airflow or tent doors. For a shelf, check whether the fixture leaves room for pots to be lifted and turned.
For a room corner, check whether the light will spill across a seating area and whether the timer or switch is easy to reach.
The best setup is the one you can adjust without dismantling the whole growing area. That ease of adjustment matters as much as the first placement.
Barrina T5 Grow Lights: Best for long plant shelves
- 8-pack of 2 ft lights
- 80W total
- 5000K white light
- Separate switches
- Supports up to 16 lights in series
Eight linked 2 ft fixtures give you flexible coverage across shelves or lower plant rows. Magnetic bars, clips, ties and connectors support several mounting options.
Pros
- Eight fixtures
- Separate controls
- Linkable design
Cons
- Not a dedicated under-canopy fixture
- Needs planning for cable placement
FECiDA Dimmable LED Grow Tent Light: Best for dimmable 2x2 coverage
- 130W real power
- 2x2 ft coverage
- 0–100% dimming
- Full spectrum from 380–780 nm
- Daisy chains up to 4 units
This hanging panel works as a strong supplemental source when lower foliage needs more light than an overhead fixture can provide. The dimmer helps you adjust intensity by growth stage.
Pros
- Smooth dimming
- 2x2 ft coverage
- Quiet cooling system
Cons
- Larger than a light bar
- Hanging mount rather than a dedicated under-canopy mount
Uallhome 2 Pack LED Grow Light Panel: Best for broad tent supplementation
- 2 panels
- 4x4 ft coverage
- White, blue, red, UV and IR LEDs
- Low-heat aluminum panels
- 6 ft power cords
Two compact panels can supplement side or lower canopy areas in a larger tent. The full spectrum supports seedlings through mature plants, while the thin aluminum design saves space.
Pros
- Two panels
- Broad stated coverage
- Compact profile
Cons
- Indoor use only
- Not waterproof
VIVOSUN LumaRay Under Canopy Grow Light: Best for smart tent control
- 2-pack
- 100W
- 3.28 ft fixtures
- 25–100% dimming
- 60% red full spectrum
- IP65 waterproof
The LumaRay is purpose-built for light below the main canopy. Magnetic clamps, 3 adjustable heights and optional SGS control make it a strong fit for grow tents that need targeted lower coverage.
Pros
- Dedicated under-canopy design
- Waterproof rating
- Dimming and remote-control options
Cons
- Some controls require a separate controller
- Heavier setup than a small strip
ELUFAH 48W Under Canopy LED Grow Light: Best for floor-mounted plants
- 48W power
- 12–22 in telescoping pole
- 0–100% dimming
- Timer
- Full spectrum with red and far red
The Saturn480 combines a light, pedestal and telescoping pole for plants that need illumination from below or beside the canopy. Its timer and dimmer make daily scheduling easier.
Pros
- Purpose-built under-canopy use
- Adjustable pole
- Timer and screen
Cons
- Floor footprint
- Lower output than the 100W and 130W options
SAMPHON 600W LED Grow Lights for Indoor: Best for large 4x4 layouts
- 6 aluminum light bars
- 4x4 ft coverage
- 0–100% dimming
- Daisy-chain function
- Foldable design
This broad six-bar fixture is better suited to a large grow area than a small lower shelf. Its dimming and even bar layout can help fill weak zones when the main fixture is mounted overhead.
Pros
- Large coverage
- Six-bar layout
- Fanless design
Cons
- Too large for many small spaces
- Designed as a broad main-style fixture
MARS HYDRO ADlite Red30 & Blue30 Led: Best for stage-specific spectrum
- 2 red 30W lights
- 2 blue 30W lights
- 3x3 ft coverage
- Brackets and hanging ropes
- Red for flowering and blue for vegetative growth
The ADlite set lets you add red or blue supplemental light according to the plant stage. It suits growers who want separate spectrum choices rather than one blended panel.
Pros
- Separate red and blue bars
- Brackets and ropes included
- Useful beside another main light
Cons
- Requires stage-based selection
- Recommended for main lights under 500W
Barrina TR40A Track Grow Lights: Best for targeted room lighting
- 40W power
- 4000K light
- 15°–60° beam range
- 90° tilt
- 350° rotation
- Mechanical timer
The TR40A works well when lower foliage sits beside a wall, shelf or plant corner. Its adjustable beam and rotating head let you aim light at a specific plant instead of covering a whole tent.
Pros
- Targeted beam
- Wall or ceiling mounting
- Timer retains settings after power loss
Cons
- Not designed specifically for tent interiors
- TR40A and TR40C cannot be combined
HHNMAHN 120W LED Grow Light Full Spectrum: Best for compact hanging coverage
- 100W standard power
- 120W maximum
- 2x2 ft coverage
- 0–100% dimming
- IP65 waterproof driver
- Fanless aluminum heat sink
This compact hanging panel fits a small tent or plant shelf where adjustable brightness matters. Its fanless aluminum heat sink avoids fan noise, while the waterproof driver suits humid indoor setups.
Pros
- Compact size
- Stepless dimming
- Fanless cooling
Cons
- Single light source
- Not a dedicated under-canopy bar
| Product | Best for | Set | Power | Light | Our score |
|---|---|---|---|---|---|
| Barrina T5 Grow Lights | long plant shelves | 8 lights, 2 ft each | 80W total, 8 x 10W | 5000K full spectrum | 9.5 |
| FECiDA Dimmable LED Grow Tent Light | dimmable 2x2 coverage | 130W | 9.4 | ||
| Uallhome 2 Pack LED Grow Light Panel | broad tent supplementation | 2 panels | 9.3 | ||
| VIVOSUN LumaRay Under Canopy Grow Light | smart tent control | 2-pack | 100W | 9.2 | |
| ELUFAH 48W Under Canopy LED Grow Light | floor-mounted plants | 48W | 8.9 | ||
| SAMPHON 600W LED Grow Lights for Indoor | large 4x4 layouts | 600W | 8.7 | ||
| MARS HYDRO ADlite Red30 & Blue30 Led | stage-specific spectrum | 2 red and 2 blue lights | 30W lights | 8.5 | |
| Barrina TR40A Track Grow Lights | targeted room lighting | 40W | 8.2 | ||
| HHNMAHN 120W LED Grow Light Full Spectrum | compact hanging coverage | 100W standard, 120W maximum | 7.9 |
Why under canopy lighting helps lower foliage
Under canopy lights are most useful when the top leaves receive strong light but lower growth sits in shadow. A supplemental fixture can improve coverage across the plant instead of simply increasing the intensity above the canopy.
Upper leaves act like a roof once a plant fills out. They catch the strongest light first, and the leaves beneath receive less energy for photosynthesis.
That matters in daily care because shaded lower growth can stay small while the top continues to dominate. The plant may look healthy from above while inner leaves turn pale or drop over time.
A second light placed below or beside the canopy changes the pattern. It gives lower foliage its own source, so the plant can use more of its leaf area.
This can also change how you water and feed, because active lower leaves will use resources that shaded leaves were using slowly. Watch the plant as a whole, not only the top.
The VIVOSUN LumaRay and ELUFAH Saturn480 are the clearest matches for this job because their names and designs focus on under-canopy placement. MARS HYDRO also works as a supplement, but its main advantage is separate red and blue spectrum control.
VIVOSUN suits tent growers who want light aimed at mid and lower growth. Its magnetic clamps and three adjustable heights make placement easier on tent walls.
That magnetic fit is handy on a metal frame, where the bar can be moved up or down as the plant grows. It also avoids extra holes in the tent structure.
ELUFAH suits plants in pots or grow bags where a floor mount makes sense. The telescoping pole lets the light rise as the plant grows.
A floor mount frees the tent wall and suits open room growing, but it takes floor space. The base must remain stable when you water, prune or move pots around it.
MARS HYDRO suits growers who think in stages. Blue bars support vegetative structure, while red bars support flowering and fruit development.
That stage based approach suits growers who already run a main light and want to add a specific colour at a specific time. It asks for more thought, because the bars need to be swapped or timed to match the stage.
A second light should fit the plant layout, not just add the highest wattage. A narrow bar along a tent wall may help more than a large panel placed too far away.
Distance and angle matter as much as the fixture itself. Light placed too far from lower leaves may add glare without reaching the shaded interior.
Close placement can be strong, so start with moderate output and watch for stress. Leaves that are already pale may need a gentler start than leaves that are only slightly shaded.
The goal is balance across the plant, not the brightest possible lower zone. Start with moderate output, then adjust while watching how the lower leaves respond.
Over several days, look for fuller lower growth, steadier colour and less leaf drop. Those signs tell you more than how bright the fixture looks to your eyes.
If the lower leaves still look shaded, check the angle before you raise the power. A small change in direction can reach leaves that extra brightness was missing.
How to choose the right fixture
Start with the area that needs more light. A 2 ft Barrina T5 strip can suit a shelf, while the Uallhome panels and SAMPHON six-bar fixture cover larger stated areas.
Barrina T5 is a set of eight 2 ft lights with 80W total power. That format suits long shelves, propagation areas and rows of smaller plants.
Each strip is short enough to fit under a shelf or along a wall, and the set can be spread across several levels. That flexibility is the main benefit for shelf growers.
Uallhome gives two 12 inch square panels for a stated 4x4 ft coverage. The thin aluminum panels suit growers who want supplemental light without a bulky fixture.
Their square shape suits a tent layout, where panels can sit at the sides or below the canopy. They are indoor only and not waterproof, so placement away from splashes matters.
SAMPHON is a 600W six-bar fixture for a stated 4x4 ft coverage. It is better matched to a large layout than to a single lower branch.
The six bars spread light across a wider area, which can help when weak zones sit at the ends of a row. That size also means it needs a larger frame and more headroom.
Next, check the mounting method. VIVOSUN uses magnetic clamps and adjustable heights, ELUFAH uses a pedestal and telescoping pole, and Barrina TR40A mounts to a wall or ceiling.
Magnetic mounting is quick on a metal tent frame. It also lets you move the bar when plant height changes.
A floor pedestal suits open room growing and pot plants. It avoids drilling or hanging hardware, but it takes floor space and must stay stable.
Wall or ceiling mounting suits a plant corner, shelf bank or green wall. The Barrina TR40A also tilts and rotates, so you can aim its beam at a specific group.
That aiming helps a single plant or a small group, rather than a whole tent. The trade-off is a more targeted beam, so placement needs care.
Controls also affect daily use. FECiDA, ELUFAH, VIVOSUN and HHNMAHN offer dimming, while Barrina T5 provides separate switches across its fixtures.
Dimming helps when the supplemental light sits close to foliage. You can lower output for seedlings or delicate leaves instead of moving the fixture back.
Separate switches help on shelves where only some rows need light. They also make it easier to run a shorter schedule for young plants.
A timer can make a fixed schedule easier, but it does not replace checking plant response. Plants still need changes as height, density and stage change.
Spectrum is the next choice. Full spectrum fixtures keep one light in use across stages, while MARS HYDRO separates red and blue bars by stage.
Full spectrum suits growers who want one fixture to stay in place from early growth to maturity. Stage specific bars suit growers who want to change the colour mix as the plant develops.
For growers comparing spectrum controls, our guide to best LED grow lights with veg and bloom switch explains when stage-based controls are useful. If the main issue is light from the sides of a tent, see best grow tent side lights.
Check the included parts before you buy. Cords, connectors, clips and brackets vary, and missing a lead connector can limit a linkable setup.
Also check the stated coverage against your actual space. A 2x2 ft panel will not fill a 4x4 ft tent on its own, even when it works well as a supplement.
Finally, match the fixture to the task you will do most often, such as watering, pruning and moving plants. A light that is easy to adjust will be used well, while a fiddly one may be left at the wrong setting.
How to set up under canopy LED grow lights
Mount or place the fixture according to its design, then begin with moderate brightness when the light is close to foliage. Increase coverage gradually while watching for leaf stress, excessive warmth or continued shade below the canopy.
Read the mounting instructions first, especially for wall, ceiling and floor fixtures. A light that shifts toward leaves can create hot spots or shade the area it was meant to help.
Check that screws, clips and brackets suit the surface you are using. A wall or ceiling fix that is not secure can move slowly over time and change the beam direction.
For tent bars, secure the fixture before the plants fill in. It is easier to set the height and angle while access is still open.
Plan each height step in advance, because lower buds and leaves will move into the path of the bar as the plant grows. A bar that was clear at first can soon be touching leaves.
For shelf strips, plan the cable run before you fix the lights. Linking several fixtures can look tidy on paper and messy once cords cross pots and trays.
Lay the cords out first and note where plugs and switches will sit. That check helps you avoid trailing cables across wet trays or blocking access to pots.
For floor-mounted lights, check that the base sits on a level surface. A wobbling pole can move the beam and may tip when brushed during watering.
Place the base where it will not be knocked by watering cans or foot traffic. A stable position also keeps the light at a consistent distance from the plant.
Begin with moderate brightness when the light is close to foliage. Close placement can stress leaves faster than overhead light at the same setting.
Increase output or move the fixture closer in small steps. Watch the lower leaves over several days rather than judging the change in the first hour.
Keep cords and controllers away from water. VIVOSUN and HHNMAHN include water-related ratings for specific parts, but that does not make every connection or surrounding setup waterproof.
Treat water ratings as limits, not permission for splashes. Keep plugs, drivers and controllers dry, and route cords away from watering paths.
That care matters in tents and hydroponic setups, where humidity and splashes are part of daily work. A dry, routed cable run is safer and easier to manage.
Use a consistent schedule and inspect the lower leaves every few days. A steady schedule makes it easier to tell whether the plant is responding to light or to another change.
If the top of the plant is already receiving strong light, the supplemental fixture may need less intensity than the main light. The lower light is filling a gap, not replacing the overhead source.
Check for continued shade after each adjustment. If inner leaves still look pale, the issue may be angle or distance rather than total power.
Try moving the fixture a little to the side or changing the tilt before you turn it up. That can reach the shaded leaves without making the nearest leaves too bright.
Clean the fixture surface as part of routine care. Dust and moisture can reduce output and make an otherwise sound setup look weak.
Wipe the lens or cover with a soft, dry cloth and check clips, poles and cords while you are there. That short routine keeps the setup working as intended and shows any looseness early.
Best under canopy LED grow lights: final picks
Choose the VIVOSUN LumaRay Under Canopy Grow Light if you want a dedicated 2-pack with red-enhanced full spectrum, dimming from 25% to 100% and magnetic mounting.
The LumaRay is built for mid and lower growth in a tent. Its 100W output, 3.28 ft length and IP65 rating suit growers who need directed supplemental light.
That format suits a tent wall, where the bar can sit close to the plant and be moved as height changes. The trade-off is that some smart controls need a separate controller.
Choose ELUFAH if a floor-mounted pole makes more sense than tent-wall mounting. The Saturn480 runs at 48W and adjusts from 12 to 22 inches in height.
That format suits potted plants, grow bags and room setups. Its timer and 0 to 100% dimming also make a fixed daily schedule easier to manage.
The pedestal keeps the light low and close, which helps lower foliage without hanging hardware. It does take floor space, so check the footprint before you place it.
Pick MARS HYDRO when you want separate red and blue bars for flowering and vegetative stages. The set includes two red 30W lights and two blue 30W lights.
This choice suits growers who want stage-specific support beside a main light. Blue supports vegetative growth, while red supports flowering and fruit development.
It suits growers who like to change the setup as the plant moves through a stage. It asks for more planning, because the right bar needs to be in place at the right time.
For shelves, the Barrina T5 Grow Lights give you 8 linkable 2 ft fixtures with separate switches. The set totals 80W and includes clips, magnetic bars, ties and connectors.
That format suits long shelves and rows of smaller plants. You can switch fixtures individually instead of lighting the whole run at once.
The same set can also run along a lower wall or a propagation area, where short strips fit more easily than a panel. Cable planning is the main task, so lay out the run before you fix it.
For broad coverage, consider Uallhome or SAMPHON, and compare more budget choices in Best Grow Lights Under 100 dollars.
Uallhome suits a stated 4x4 ft supplemental area with two compact panels. SAMPHON suits a larger 4x4 ft layout with six aluminum bars and 600W of stated power.
Those two suit growers who need wider light rather than a short bar. They work best when the frame and hanging space can hold a larger fixture without crowding the plants.
The right under canopy light is the one that matches the shaded area, mounting space and control style you will use consistently.
Start with the weakest zone, place the fixture to reach it, and adjust in small steps. That steady approach will do more for lower foliage than a hurried change in power.
Our top 3 picks at a glance
-
1
-
2
Best for dimmable 2x2 coverageFECiDA Dimmable LED Grow Tent Light
9.4/10 our score
See it on Amazon -
3
Best for broad tent supplementationUallhome 2 Pack LED Grow Light Panel
9.3/10 our score
See it on Amazon
Frequently asked questions
What are under canopy LED grow lights?
Under canopy LED grow lights are supplemental fixtures placed below or beside the main plant canopy. They help send light toward lower foliage and shaded areas that an overhead fixture may not reach evenly.
Choose a dedicated under-canopy bar when mounting space is limited, or use a panel when you need broader supplemental coverage.
Are under canopy grow lights worth using?
They can be useful when upper leaves shade lower foliage or when a tent has uneven light coverage. A supplemental fixture does not replace choosing the right main light, height and daily schedule.
Start with the weakest-lit area and adjust brightness and distance gradually.
How much power do under canopy LED grow lights need?
Power depends on the area and whether the fixture supplements or replaces the main light. The picks here range from the 40W Barrina TR40A and 48W ELUFAH to the 130W FECiDA panel and larger 600W SAMPHON fixture.
For a 4x4 tent, compare the whole lighting plan in our 4x4 LED grow light wattage guide.
Should under canopy lights be red or full spectrum?
Full-spectrum lights offer a broad option across growth stages, while separate red and blue fixtures let you target specific stages. MARS HYDRO separates red bars for flowering from blue bars for vegetative growth.
Choose based on whether you want one general light or stage-specific control.
How should you place an under canopy grow light?
Place the fixture where upper leaves do not block its light, while keeping the stated mounting method and plant clearance in mind. Bars can run along lower tent walls, and floor-mounted fixtures can shine upward from beneath foliage.
Adjust brightness and distance if leaves show stress or the lower growth remains shaded.
About this guide: Our look at under canopy LED grow lights draws on maker specs, materials and what owners report. See how we research.



