9 Best Under Cabinet Grow Lights for Indoor Plants (November 2026)
The best under cabinet grow lights for indoor plants include the Mosthink Indoor Grow Strip Lights for Under for brightness control, the Kullsinss 16in Grow Light Strips for spectrum modes, and the yadoker Grow Lights for Indoor Plants for single potted plants.
On this page (10 sections)
- Best under cabinet grow lights for indoor plants, ranked
- How we compared under cabinet grow lights
- What size bar fits under your cabinets?
- Do you need a grow light for indoor herbs?
- Can you use LED strip lights to grow plants?
- Which mounting method works best under cabinets?
- How do timers and dimming change plant growth?
- Can you grow indoor plants under fluorescent lights?
- When should you pick bars, strips or halo lights?
- Verdict: best under cabinet grow lights for indoor plants
The best under cabinet grow lights for indoor plants are low-profile strips and bars with dimming and a timer. They fit the shallow space under kitchen cabinets, sit close to herbs and houseplants, and keep light hours steady.
Mosthink is our top pick for brightness control, with five levels and a 3/6/12 hour timer. Kullsinss adds spectrum modes, and Barrina gives you linked bars that can run a long cabinet in a row.
Our score weighs specs, features and buyer feedback against what you're shopping for. We compared bar length, LED count, wattage, timer options, dimming steps and mounting hardware across all nine picks.
Our picks at a glance
-
1
Best for brightness controlMosthink Indoor Grow Strip Lights for Under
9.7/10 our score
See it on Amazon -
2
-
3
Best for single potted plantsyadoker Grow Lights for Indoor Plants
9.7/10 our score
See it on Amazon
- 4
Best for wide coverageCheck it - 5
Check itBarrina Grow Lights for Indoor Plant
Best for linked runs - 6
Best for mounting optionsCheck it - 7
Check itBarrina T5 Grow Lights for Indoor Plants
Best for magnetic mounting - 8
Check itLORDEM Grow Light for Indoor Plants
Best for stake-in pots - 9
Check itSDOVUERC 16'' 6 Bars Grow Light Strips
Best for long shelves
Best under cabinet grow lights for indoor plants, ranked
Strip lights win under cabinets because they are thin and spread light along a row of pots. Halo lights on poles do not mount under cabinets, but they suit single pots, so we kept two for homes where stake-in placement fits better.
Mosthink Indoor Grow Strip Lights for Under: Best for brightness control
- Full spectrum 380nm to 800nm
- 5 brightness levels 10% to 100%
- Auto on/off timer 3/6/12 hours
- IP65 waterproof
- 78 in power cord
A 13 in strip with five brightness steps and a 3/6/12 hour timer for shelves and under cabinets.
Pros
- Five brightness levels
- Timer with auto restart
- Screws, tape and ties included
Cons
- Brightness steps are coarse
- Timer needs power left on
Mosthink suits herb growers who want clear brightness steps without menus. Its five levels run from 10% to 100%, so you can start seedlings low and raise intensity as plants grow through each stage.
The strip is 13 in wide and 0.8 in deep, which fits most kitchen cabinets and shallow plant shelves. It comes with 8 screws, 2 double-sided tapes and 6 ties, so you can pick the mount that suits painted wood, metal or laminate.
Full spectrum covers 380nm to 800nm, and a red and blue mix adds wavelengths for succulents and flowering plants. That mix helps when one shelf holds leafy herbs and another holds buds.
A 78 in cord reaches a typical kitchen outlet without an extension cord. Place the controller where you can reach it without moving pots.
The timer runs 3, 6 or 12 hours and restarts at the same time each day. Leave power on and let the controller handle the cycle while you are away.
IP65 waterproof rating suits misting and humid kitchens, though Mosthink says not to put it directly in water. That matters near sinks and dishwashers.
Trade-off: five steps are coarse compared with 10-level dimming. If you need fine control, look at Rocoking or RWNTAO below.
Kullsinss 16in Grow Light Strips: Best for spectrum modes
- 120 LEDs, 380nm to 800nm
- 3 spectrum modes
- 5 dimmable levels
- Timer 6/12/16 hours
- 95 in power cord
Two 16 in bars with white, warm white and red mix modes and a 6/12/16 hour timer.
Pros
- Three spectrum modes
- 120 LEDs across two bars
- Long 95 in cord
Cons
- Two bars need two spaces
- Mode choice adds setup steps
Kullsinss suits growers who want to change spectrum by growth stage. Its 120 LEDs split into white, warm white and red, with three modes you can switch as plants move from leaves to flowers.
The set has two 16 in bars, 17 in with housing, so it covers wider cabinets than a single 13 in strip. Total wattage is 20 watts, with 120 diodes sharing the load across both bars.
Five dimmable levels and a 6/12/16 hour timer cover most herb and houseplant routines. You can run shorter cycles for seedlings and longer cycles for mature plants.
White light at 6000K aids leaf growth, while warm white and red at 3000K and 660nm support flowering and fruiting. The mix mode aims for all stages at once.
Mounting uses screws, ties and double-sided tape. A 95 in cord gives extra reach to outlets behind appliances or along a backsplash.
The 5V3A adapter is described as more stable than 5V1A adapters. That matters when both bars run for 12 or 16 hours.
Kullsinss says heat dissipation keeps the strips safe for plants, and the design suits germination, flowering, fruiting and hydroponics.
Trade-off: two bars mean two placements to plan. If your cabinet run is short, a single strip may be simpler.
yadoker Grow Lights for Indoor Plants: Best for single potted plants
- 72 LED full spectrum 380nm to 800nm
- Height adjustable 13.7 to 61.1 in
- 10 level dimming
- Timer 8/12/16 hours
- 5V USB power
A halo light on a telescopic bamboo pole that stakes into a pot and adjusts as plants grow.
Pros
- Adjustable height
- 10 dimming levels
- No mounting needed
Cons
- Not an under cabinet bar
- One plant per light
yadoker suits a single potted plant on a counter or table, not a cabinet run. Its halo disc on a telescopic pole stakes into soil and rises from 13.7 to 61.1 in as your plant grows.
72 LEDs cover 380nm to 800nm, with 36 white at 5000K, 28 warm white at 3000K, 6 red and 2 blue. That mix supports seedlings through bloom in rooms with little natural sunlight.
Ten dimming levels from 10% to 100% give finer control than most strips here. Use the inline controller buttons to adjust without unplugging.
An 8/12/16 hour timer runs on a long cord, so you can place it in a dark corner or windowless office. If power is cut, you will need to reset the timer.
It runs on 5V USB and stays cool to the touch. That low voltage design suits long hour use near leaves.
yadoker is UL-listed and CE-compliant, and the bamboo pole blends with home decor. The pointed stake means no screws, tape or tools.
The wide disc covers a larger area when fully extended. That helps small groups of plants in one planter.
Trade-off: one light covers one pot or a small group. For a row of herbs under a cabinet, choose a strip or bar instead.
Rocoking Grow Light: Best for wide coverage
- 4 ultra-thin panels, 316 LEDs
- 40 watts total
- Timer 3/9/12 hours
- 10 dimmable levels
- 3 lighting modes
Four 11.81 in panels that can cover several cabinet sections, with 10 dimming levels and a cycle timer.
Pros
- Four panels for wide runs
- Very thin 0.04 in profile
- 316 LEDs at 40 watts
Cons
- Four panels need cable planning
- Timer options are 3/9/12 hours
Rocoking suits wide cabinet runs where one strip leaves gaps. Its four ultra-thin panels measure 11.81 x 3.15 x 0.04 in, so you can spread coverage across several sections.
316 LEDs draw 40 watts in total, with an aluminum back plate for heat control. Full spectrum runs 380nm to 780nm for germination, flowering, fruiting and chlorophyll synthesis.
Ten dimming levels from 10% to 100% and three lighting modes let you match intensity to each plant. The 3/9/12 hour timer cycles daily once set.
Mounting uses cable ties to hang panels or 3M double-sided adhesive to hide them under a shelf or cabinet. The kit includes 8 tapes and 16 zip ties.
Rocoking suits orchids, salads, tomatoes, succulents and seed germination. The thin profile saves space and keeps sightlines clean under cabinets.
The 24 hour cycle function helps when you travel. Set it once and the panels resume the same daily pattern.
Color rendering is 90 and color temperature is 6500 Kelvin. That gives a clear, daylight-like look in kitchens.
Trade-off: four panels need more cable routing than one strip. Plan cord paths before you stick anything up.
Barrina Grow Lights for Indoor Plant: Best for linked runs
- 1 ft T5 bars, 4 packs
- Full spectrum yellow
- 20W total, 96 LEDs
- Each bar has on/off switch
- Links up to 16 lights
Four 1 ft T5 bars you can link in series, with separate switches on each bar.
Pros
- Links up to 16 bars
- Separate switch per bar
- Clips and tape included
Cons
- Non-magnetic
- Needs clean smooth surface
Barrina suits long runs and shelves where you want separate control. Its four 1 ft T5 bars link up to 16 in a series, so one outlet can light a whole wall of plants.
Each bar has its own on/off switch, so you can turn off a section while seedlings keep growing under another. Total draw is 20 watts with 96 LEDs.
Full spectrum yellow light replaces sunlight across seedling, vegetative and flowering stages. Barrina says over 95% of light energy can be absorbed by plants.
The kit includes 2 power cords, 3 connecting cords, 8 clips, 12 tapes and 12 cable ties. That hardware covers most cabinet surfaces.
Bars are 12 x 0.79 x 0.79 in, which fits shallow cabinets. The slim housing keeps leaves from touching hot surfaces.
Barrina notes the T5 is non-magnetic and should not mount on uncured plaster, dusty, greasy or rough surfaces. Clean and dry the cabinet underside first.
For mixed shelves, separate switches help you match PPFD to each plant. Turn higher light on for sun hungry species.
Trade-off: linked bars need tidy cable planning. If you want magnets, see the black Barrina set below.
RWNTAO LED Grow Light Strips: Best for mounting options
- 8.6 in strips, 156 LEDs total
- Full spectrum 380nm to 800nm
- Timer 3/9/12 hours
- 10 dimmable levels
- Screws, ties, tape and magnets
Short 8.6 in strips with four mounting choices, 10 brightness levels and a cycle timer.
Pros
- Four mounting options
- Short strips fit small cabinets
- 10 brightness levels
Cons
- Short strips cover less width
- Three switch modes need learning
RWNTAO suits small cabinets and renters who want mounting choices. Its 8.6 in strips come with screws, ties, tape and magnets, four ways to mount the same bar.
Each strip has 26 LEDs at 3500K, with 2 strips totaling 156 LEDs. Full spectrum covers 380nm to 800nm to simulate natural sunlight.
Ten dimmable levels and a 3/9/12 hour timer cover seedlings, succulents and leafy herbs. Short cycles suit seedlings that need rest periods.
Three switch modes let you run light A, light B or both. That helps when one side of a shelf needs more light than the other.
The all-aluminum body resists corrosion and stays compact at 8.66 x 0.55 x 0.28 in. A 71 in cord reaches outlets in offices, shelves and greenhouses.
RWNTAO suits flowers, vegetables, fruits and succulents, and says red light promotes flower and fruit growth. The 3000K warm tone suits living spaces.
Color rendering is 90, which keeps foliage colors looking natural. That matters for plants in visible living areas.
Trade-off: short strips may need two or three to cover a wide cabinet. Check your cabinet width before you order.
Barrina T5 Grow Lights for Indoor Plants: Best for magnetic mounting
- 1 ft T5 bars, 4 packs, 5000K white
- 20W total, 96 LEDs
- Magnetic bar plus tape and clips
- Each bar has on/off switch
- Links up to 16 lights
Four black 1 ft bars with a magnetic bar for metal surfaces, plus tape and clips for other cabinets.
Pros
- Magnetic mounting option
- Black casing blends in
- Links up to 16 bars
Cons
- Magnet needs metal surface
- 5000K white only
Barrina black T5 suits kitchens where white housings show. Its black casing and dark cords blend into fine cabinets and plant displays.
Four 1 ft bars draw 20 watts total with 96 LEDs at 5000K white. Full spectrum light supports seedling, vegetative and flowering stages.
A magnetic bar lets you attach bars to any magnetic surface, while clips, cable ties and double-sided tape cover non-magnetic cabinets. Bars link up to 16 in a series.
Each fixture has an on/off switch on the housing, so you can control bars separately or together. That helps when one shelf needs less light than another.
The black exterior design is a practical choice for open shelving and visible installs. Cords stay less noticeable against dark cabinet undersides.
Total draw stays at 20 watts for four bars. That low draw helps when you light several shelves at once.
The same 96 LED layout as the yellow Barrina set keeps output consistent. Only the casing and light color differ.
Trade-off: magnets only work on metal. For wood or laminate, you will use tape or clips.
If you prefer warm yellow light, check the other Barrina set above.
LORDEM Grow Light for Indoor Plants: Best for stake-in pots
- Full spectrum 380nm to 800nm
- 2 pack halo lights
- Timer 4/8/12 hours
- 4 dimmable levels 25% to 100%
- Height adjustable, 90 degree rotation
Two halo lights on telescopic poles for pots, with a 4/8/12 hour timer and four brightness levels.
Pros
- Two lights in one pack
- Rotates 90 degrees
- Stake in, no tools
Cons
- Not for under cabinets
- Four brightness steps
LORDEM suits potted herbs and houseplants on tables and counters. Its two halo lights on telescopic poles stake into soil and adapt to plant height.
Full spectrum covers 380nm to 800nm with warm white high efficiency diodes. The light head rotates 90 degrees, so you can aim it at the plant.
Four brightness levels run 25%, 50%, 75% and 100%. That range suits herbs, succulents, orchids and tomatoes at different stages.
A 4/8/12 hour timer turns on and off at the same time daily, with no unplugging needed. LORDEM says the LEDs last up to 50,000 hours.
The sharp pole inserts firmly into planters, and the aluminum housing keeps weight low. The warm natural light fits home decor.
Color rendering is 92 and color temperature is 4500 Kelvin. That balance keeps rooms comfortable while plants get grow light.
You can extend the pole longer to cover a larger area or more plants. That helps as a small herb grows taller.
Trade-off: stake-in lights do not mount under cabinets. For cabinet runs, choose a strip or bar from the top picks.
SDOVUERC 16'' 6 Bars Grow Light Strips: Best for long shelves
- 16 in 6 bar strips, 360 LEDs
- Full spectrum 380 to 800nm
- Timer 6/12/18 hours
- Dimmable
- 95 in power cord
A 16 in six-bar strip with 360 LEDs, a 6/12/18 hour timer and dimming for shelves and stands.
Pros
- Six bars on one strip
- 360 LEDs
- Long 95 in cord
Cons
- Single long strip
- Fewer timer options
SDOVUERC suits long shelves and plant stands where one strip can span the row. Its 16 in six-bar strip packs 360 LEDs for broad coverage.
Warm white, cool white and 660nm red LEDs emit 380 to 800nm to simulate noon sunlight. That mix targets photosynthesis across growth stages.
A circular memory timer offers 6, 12 or 18 hours. Keep power on and the light cycles daily on your setting.
Mounting uses 12 screws, 6 double-sided tapes and 6 cable ties. You can stick bars to a surface, tie them to a shelf or fix them with screws.
Total wattage is 36 watts, with a 95 in cord for flexible placement. SDOVUERC says the lights are FCC, CE and RoHS certified.
Light output is listed at 3600 lumens. That figure helps compare brightness with smaller strips.
The 6000 Kelvin color temperature gives a bright, daylight look. That suits shelves in offices and living rooms.
Trade-off: one long strip is less flexible than separate bars. Timer options skip short 3 hour cycles that some seedlings prefer.
How we compared under cabinet grow lights
We compared bar length, LED count, wattage, timer range, dimming steps and mounting hardware. Fit came first, because a light that does not fit cannot help herbs.
We then weighed spectrum range, cord length and control type. Full spectrum 380nm to 800nm was common, but modes and dimming differed.
What we measured first
We ranked size and profile before brightness, then wattage per bar and total LEDs. Rocoking lists 316 LEDs at 40 watts, while SDOVUERC lists 360 LEDs at 36 watts.
Timer range came next, from 3 to 18 hours across the nine picks. Dimming steps and mounting hardware decided close calls, with ten levels beating four or five steps for fine control.
Why rankings differ by cabinet
A 13 in Mosthink strip fits a standard cabinet, while 16 in Kullsinss or SDOVUERC bars need wider spans. Four Rocoking panels or linked Barrina bars cover several sections at once.
Short RWNTAO strips fit narrow spaces where longer bars would overhang. That fit often matters more than raw brightness.
What size bar fits under your cabinets?
Measure cabinet width, depth and the gap above plants first. Leave 2 to 4 in between the light and tallest leaves to reduce leaf burn.
Short cabinets and small herb shelves
Choose 8.6 in or 13 in strips for cabinets under 18 in wide. RWNTAO and Mosthink fit these spaces well.
Wide kitchen runs
Use linked Barrina bars or four Rocoking panels for runs over 36 in. That keeps light even from end to end.
Depth and cord routing
A 0.04 in Rocoking panel fits shallower gaps than a 1.9 in Kullsinss housing. A 95 in cord on Kullsinss or SDOVUERC reaches outlets behind appliances, while shorter 71 in and 78 in cords suit nearby outlets.
Do you need a grow light for indoor herbs?
Yes, herbs on a counterside often need extra light. A Do You Need a Grow Light for Indoor Herbs? guide helps you judge window light before you buy.
Basil, mint and parsley grow best with 12 to 16 hours of steady light. Place the strip 6 to 12 in above leaves and raise it as herbs grow.
Herbs that take more light
Basil and cilantro respond to higher brightness levels. Start at 80% to 100% and watch for pale leaves.
Herbs that take less light
Mint and parsley tolerate 50% levels. Lower brightness reduces heat and slows leggy growth.
Seedlings on a shelf
Seedlings prefer short cycles and lower levels at first. Mosthink, RWNTAO and Rocoking offer 3 hour timers for that rest period.
Can you use LED strip lights to grow plants?
Yes, if the strip gives full spectrum light and enough intensity. Our guide on Can You Use LED Strip Lights to Grow Plants? explains what to check.
Look for 380nm to 800nm coverage, not just white light for rooms. Red and blue wavelengths help flowering and leaf growth.
Plain room strips against grow strips
Room strips often lack red wavelengths that plants use. Grow strips add red and blue diodes for photosynthesis, and aluminum housings help spread heat.
Heat and placement
LED strips run cooler than older bulbs, but still need airflow. Leave space for heat to escape under cabinets.
PPFD and distance
Light strength drops fast with distance. Keep strips close to leaves, 6 to 12 in for most herbs, rather than turning brightness to full.
Which mounting method works best under cabinets?
Screws hold best on solid wood. Tape works fast on clean, dry surfaces, magnets suit metal cabinets, and cable ties work on open shelving.
Tape tips that last
Clean the underside, press tape firmly and wait a few minutes before hanging the bar. Skip tape on dusty, greasy or rough surfaces.
When to skip tape
Barrina warns against tape on uncured plaster and rough finishes. Use clips, ties or screws instead.
Screws and magnets for renters
Renters often prefer magnets or tape to avoid holes. RWNTAO includes both, and the black Barrina set includes a magnetic bar.
How do timers and dimming change plant growth?
Timers keep light hours steady, which matters more than total brightness for many herbs. Most timers need power left on, with auto restart at the same time daily.
Choosing timer hours
Pick 12 hours for herbs and leafy houseplants. Pick 16 hours for seedlings or low light rooms.
Choosing brightness levels
Start at 50% and watch leaf color over a week. Raise levels if growth turns pale or leggy.
Short cycles for rest
Some plants do better with shorter cycles. LORDEM offers 4 hours and Mosthink offers 3 hours, while SDOVUERC starts at 6 hours.
Can you grow indoor plants under fluorescent lights?
Fluorescent tubes can grow plants, but LED strips often use less power. Read Can You Grow Indoor Plants Under Fluorescent Lights? for a full comparison.
LED grow strips give more control over spectrum and dimming, and fit thinner profiles under cabinets.
Fluorescent tubes in garages
Garage fluorescents can support leafy plants on shelves if pots sit within a few inches of the tubes. Timers help keep hours steady in windowless spaces.
When LED strips make more sense
Choose LED strips for kitchens and living rooms. Barrina T5 bars mimic tube shapes in a slim housing for spaces built for fluorescents.
When should you pick bars, strips or halo lights?
Strips suit most cabinets because they are thin and spread light along a row. Bars in T5 housings add switches and linking, while halo lights suit single pots.
For shelves, our Best Plant Grow Light Bar For Shelves guide helps you match bar length to shelf width.
If you prefer metal surfaces, best magnetic grow lights can mount with magnets instead of tape or screws.
For Barrina setups, installing barrina grow lights walks through clips, tape and linking cords step by step.
Choosing for a row of herbs
Pick a strip or linked bars for a row. Light spreads along the row and each plant gets similar hours.
Choosing for one tall plant
Pick a halo light for one tall plant. yadoker extends to 61.1 in and LORDEM extends to 26 in, covering most table plants.
Choosing for mixed shelves
Mix strips and a halo when shelves hold different heights. Each plant type gets light at its own level.
Verdict: best under cabinet grow lights for indoor plants
Pick Mosthink for brightness control and a daily timer. Pick Kullsinss for spectrum modes across leaf and flower stages.
Pick Barrina for linked bars on long cabinets.
Pick RWNTAO for small cabinets with magnets, tape, ties or screws. Pick yadoker or LORDEM for single pots that need stake-in height.
Measure your cabinet first, then match bar length to width. Keep 2 to 4 in of space above leaves and set a 12 hour timer to start.
Our top 3 picks at a glance
-
1
Best for brightness controlMosthink Indoor Grow Strip Lights for Under
9.7/10 our score
See it on Amazon -
2
-
3
Best for single potted plantsyadoker Grow Lights for Indoor Plants
9.7/10 our score
See it on Amazon
Frequently asked questions
What are the best under cabinet grow lights for indoor plants?
Low-profile strip lights with dimming and a timer work best under cabinets. They fit shallow spaces, sit close to herbs and houseplants, and keep light hours steady.
Choose bar length to match your cabinet width.
Do indoor herbs need a grow light under a cabinet?
Herbs on a counterside often get too little light from a window. An under cabinet strip adds steady hours of light close to the leaves.
Check how much natural light your kitchen gets first.
How long should under cabinet grow lights stay on?
Most timers here offer 3 to 18 hours. Herbs and leafy houseplants often do well with 12 to 16 hours of light.
Start with a mid setting and watch leaf color and growth.
Can strip lights be mounted under a cabinet?
Yes, most strips in this guide mount with screws, double-sided tape, ties or magnets. Measure cabinet depth and width first.
Leave room for the cord to run to an outlet.
What color light do plants need under a cabinet?
Full spectrum lights cover 380nm to 800nm, close to natural sunlight. White light helps leaf growth, and red light helps flowering.
Mixed spectrum modes let you shift the balance.
About this guide: Our look at under cabinet grow lights for indoor plants draws on maker specs, materials and what owners report. See how we research.



