9 Best HPS Grow Lights for Cannabis (November 2026)
The best HPS grow lights for cannabis include the BESTVA DC1000 High-Yield Indoor Plant Grow Light for 2x4 ft tents, the MARS HYDRO 300W TSL2000 Led Grow Lights for 4x2 ft flowering tents, and the MARS HYDRO TS1000 150W Grow Light for 2.5x2.5 ft tents.
On this page (6 sections)
The best HPS grow lights for cannabis depend on whether you want classic HPS hardware or a cooler LED alternative. The products in this roundup are LEDs, so compare them by flowering coverage, dimming, spectrum, heat planning and canopy reach rather than treating them as HPS lamps.
HPS is a lamp technology that needs a ballast, while these picks are complete LED fixtures with their own drivers and controls. That difference should shape your shortlist from the start.
HPS remains familiar for flowering because it uses a known format for reflector hoods, air cooling and replacement lamps. LED fixtures can be easier to size by wattage and footprint, but spectrum, beam angle and dimming still matter.
For flowering, ask how much of the canopy the light reaches, not only how bright the centre looks. A narrow beam may suit a single plant, while a wider layout may suit a flatter canopy.
Heat and setup also differ. HPS hardware can add heat near the lamp, while LEDs still need airflow and clear space around the body.
Watch the plants after any change, as leaf posture and growth rate guide you better than wattage alone.
If you are comparing technologies first, read our guide to HID lights vs LED. For classic fixture options, see the guide to best high pressure sodium grow lights.
Our picks at a glance
-
1
Best for 2x4 ft tentsBESTVA DC1000 High-Yield Indoor Plant Grow Light
9.7/10 our score
See it on Amazon -
2
Best for 4x2 ft flowering tentsMARS HYDRO 300W TSL2000 Led Grow Lights
9.7/10 our score
See it on Amazon -
3
- 4
Check itSpider Farmer SF1000 LED Grow Lights
Best for quiet 2x2 ft flowering - 5
Check itSpider Farmer SF1000D LED Grow Light
Best for a simple 2x2 ft setup - 6
Check itVIVOSUN LumaLight 200W LED Grow Light
Best for smart dimming - 7
Check itKINGPLUS KingLED KING1000 Grow Light for Indoor
Best for mode switching - 8
Check itVIPARSPECTRA LED Grow Lights for Seed Starting
Best for compact dimming - 9
Check itKINGPLUS KingLED KING2000 Grow Light for Indoor
Best for 3x5 ft tents
The best HPS grow lights for cannabis alternatives
The best match here is the BESTVA DC1000 for several small tent layouts, while the MARS HYDRO TSL2000 is better for a long 4x2 ft flowering area. Smaller tents have more focused choices from Spider Farmer, VIPARSPECTRA and MARS HYDRO.
That spread is useful because tent shape often decides the right fixture before output does. A short and wide tent needs a different layout from a long and narrow one.
We compared stated coverage, power, light modes, spectrum details, dimming and canopy use. We also looked at size, weight and hanging needs so the fixture can physically fit the space.
Our score weighs specs, features and buyer feedback against what you're shopping for. It is a guide to fit, not a substitute for matching the coverage to your tent.
If your flowering area is 2x2 ft, several compact models are easier to place and adjust. If it is 4x2 ft, the longer bar shape of the TSL2000 becomes a stronger match.
Keeping veg and flower footprints separate helps avoid a common mistake. A light that covers more ground in veg may not give the same density once plants mature.
| Product | Best for | Coverage | Power | Modes | Our score |
|---|---|---|---|---|---|
| BESTVA DC1000 High-Yield Indoor Plant Grow Light | 2x4 ft tents | 2x2, 2x3 and 2x4 ft tents | 1000 watts | VEG and BLOOM | 9.7 |
| MARS HYDRO 300W TSL2000 Led Grow Lights | 4x2 ft flowering tents | 4x2 ft flower and 3x5 ft veg | 300 watts | 9.7 | |
| MARS HYDRO TS1000 150W Grow Light | 2.5x2.5 ft tents | 2.5x2.5 ft recommended and up to 3x3 ft maximum | 150 watts | 9.7 | |
| Spider Farmer SF1000 LED Grow Lights | quiet 2x2 ft flowering | 2x2 ft flower and 3x3 ft veg | 100 watts | 9.6 | |
| Spider Farmer SF1000D LED Grow Light | a simple 2x2 ft setup | 3x3 ft veg and 2x2 ft flowering | 100 watts | 9.5 | |
| VIVOSUN LumaLight 200W LED Grow Light | smart dimming | 200 watts | 9.5 | ||
| KINGPLUS KingLED KING1000 Grow Light for Indoor | mode switching | 2x2, 2x3 and 2x4 ft tents | VEG and BLOOM | 9.3 | |
| VIPARSPECTRA LED Grow Lights for Seed Starting | compact dimming | 3x3 ft veg and 2x2 ft flowering | 150 watts | 9.2 | |
| KINGPLUS KingLED KING2000 Grow Light for Indoor | 3x5 ft tents | 3x3, 3x4 and 3x5 ft tents | 200 watts | 9.1 |
What matters more than wattage for cannabis flowering?
For cannabis flowering, the flowering footprint and canopy distance matter more than a large wattage number by itself. A fixture should cover the plant area evenly at a height that does not stress the leaves.
Wattage is still useful for comparing energy use between similar fixtures. It does not tell you how evenly light lands across a wide canopy or how deep it reaches.
Start by marking the plant area you need to cover during flowering. Then check whether the stated flower footprint matches that area at a realistic hanging height.
Plants spaced apart can use a wider spread more easily, while a dense canopy needs more even coverage because lower leaves can shade each other.
HPS buyers should also plan around heat. A bulb, reflector and ballast can change the room heat load, while an LED fixture may have a different cooling setup.
Ventilation should be planned with the light, not added later, with a route out for warm air and a route in for fresh air.
Use the manufacturer hanging guidance and watch the canopy after changing height or brightness. Dimming can help during early growth when plants need less intensity, and it can help you raise output as the canopy widens and begins flowering.
The best HPS cool tube grow light options are worth comparing when ducting and heat removal are central to your setup. For LEDs, check the heat sink design and keep clear space around the body.
Product details
BESTVA DC1000 High-Yield Indoor Plant Grow Light: Best for 2x4 ft tents
- Fits 2x2, 2x3 and 2x4 ft tents
- VEG and BLOOM modes
- Full spectrum with 3000K, 5000K, 460nm and 660nm light
- 640 LED light sources
The DC1000 fits several small tent footprints and offers separate VEG and BLOOM modes. Its full spectrum combines white, blue and red light for the full plant cycle.
Pros
- Several tent-size options
- VEG and BLOOM modes
- Full-spectrum output
Cons
- No dimming feature stated
- Higher-output lighting needs careful hanging-height adjustment
The BESTVA DC1000 is the strongest all-around fit for a small tent with several possible layouts. It fits 2x2, 2x3 and 2x4 ft tents, so you can match the fixture to the growing area instead of using a single assumed footprint.
That flexibility suits growers who have not yet settled the final plant count. It also helps if your tent can be reshaped between cycles.
Its full spectrum combines 3000K and 5000K white LEDs with 460nm blue and 660nm red light. That mix is aimed at the full cycle from germination through flowering and fruiting.
The VEG mode suits seedlings and early vegetative growth, while BLOOM can be added as plants need more light. Keeping both on during flowering and fruiting can raise output when the canopy is mature.
BESTVA lists 640 LED light sources and a 120 degree beam angle. The wider angle helps spread light across the tent rather than concentrating it in one strip.
The black sheet-metal fixture measures 12.2 x 8.46 x 1.85 in and hangs from the ceiling. At 3.6 pounds, it is light enough for most tent frames, but the hangers still need to be secure.
Choose this model when you want broad small-tent flexibility and separate growth modes. For denser canopies, raise the fixture or thin the foliage so lower leaves get fair light.
MARS HYDRO 300W TSL2000 Led Grow Lights: Best for 4x2 ft flowering tents
- 300-watt LED output
- 4x2 ft flower and 3x5 ft veg coverage
- Dimmable from 0 to 100%
- Daisy chains up to 50 lights
The TSL2000 is the strongest fit here for a long 4x2 ft flowering area. Its external dimmer lets you lower output for earlier growth stages.
Pros
- Long 4x2 ft flowering footprint
- 0 to 100% dimming
- 120° beam angle
Cons
- RJ12 connector is needed for daisy chaining
- Long rectangular body needs planned hanging space
The MARS HYDRO 300W TSL2000 is the best fit for a long flowering tent. Its stated coverage is 4x2 ft for flower and 3x5 ft for veg, which gives it a clear role in a rectangular grow space.
The external driver dims from 0 to 100%, helping you reduce output during early growth and raise it as the canopy develops. MARS HYDRO also states that up to 50 lights can be daisy chained, although an RJ12 connector is needed separately.
Its 704 LEDs use a 120° reflector design, and the full spectrum includes 730–740nm red IR plus white light ranges. The aluminum fixture measures 39.21 x 9.97 x 3.54 in, so check the tent's hanging width before choosing it.
Pick the TSL2000 when a 4x2 ft flowering footprint matters more than compact size. It is one of the clearest LED alternatives for a grower moving away from a long HPS fixture.
MARS HYDRO TS1000 150W Grow Light: Best for 2.5x2.5 ft tents
- 150-watt LED output
- 2.5x2.5 ft recommended coverage
- Dimmable from 0 to 100%
- Daisy chains up to 50 lights
The TS1000 suits a compact tent where a 150-watt fixture is easier to match to the footprint. It also offers dimming and daisy chaining for a setup that may expand.
Pros
- Compact 2.5x2.5 ft target
- 0 to 100% dimming
- Fanless aluminum design
Cons
- Maximum coverage is larger than the recommended footprint
- A smart controller is not included
The MARS HYDRO TS1000 suits a compact flowering area where 150 watts is easier to match to the tent. Its recommended coverage is 2.5x2.5 ft, with up to 3x3 ft listed as the maximum coverage.
Use the smaller recommended area when planning for flowering. The maximum figure is better treated as the outer limit for veg or sparse plants.
The external dimmer adjusts from 0 to 100%, so you can lower output for seedlings and raise it as plants grow. That control is helpful when plants are close to the fixture.
The fixture can be daisy chained with up to 50 LED lights using an RJ12 connector bought separately. This suits a grower who may add matching lights later rather than one who needs a single large bar now.
A smart controller is not included, so plan for manual control unless you add compatible equipment separately. Bluetooth or app features should not be assumed from the base model.
The TS1000 uses 342 LEDs, a 120 degree beam angle and an aluminum body measuring 14.2 x 13.2 x 1.4 in. At 1.7 kg, it is compact and easier to position than a long fixture.
Its full spectrum includes white light, red IR and the 3200 to 4200Knm and 5200 to 6800Knm ranges stated for the fixture. The fanless design keeps the setup quiet, while the aluminum body helps spread heat.
Spider Farmer SF1000 LED Grow Lights: Best for quiet 2x2 ft flowering
- 100-watt LED output
- 2x2 ft flowering and 3x3 ft veg coverage
- Dimmable
- Fanless design
The SF1000 is a compact, fanless option for a small flowering footprint. Its full spectrum includes white, blue, red and IR light for different growth stages.
Pros
- Quiet fanless design
- Small 2x2 ft flowering footprint
- Dimmable output
Cons
- 100-watt output suits smaller spaces
- 90° beam angle is narrower than several other picks
The Spider Farmer SF1000 is a good fit for a quiet 2x2 ft flowering tent. Its stated coverage is 2x2 ft during flowering and 3x3 ft during vegetative growth, making the smaller footprint the useful number for a dense flowering canopy.
That split between veg and flower coverage is common in compact fixtures. Young plants spread out, while mature plants need stronger coverage over a smaller area.
This 100-watt LED uses a fanless design and a dimming knob. The quiet build suits a bedroom, office or other shared indoor space.
Its full spectrum includes white, blue, red and IR light, with 3000K, 5000K, 660nm and IR 760nm details. The mix is aimed at all growth stages, with red and IR doing more work as flowering begins.
The fixture measures 10.5 x 11.8 x 2.3 in and has a 90 degree beam angle. The narrower angle suits a small tent, but it leaves less margin if plants drift outside the centre.
Spider Farmer also lists a thick aluminum heat sink and a ceiling-mount design. The solid body helps the fixture feel stable when you move it between heights.
At 5.8 pounds, it is heavier than its size might suggest, so check the tent frame and hangers. A secure mount matters more than it does with a very light bar.
Pick the SF1000 when silence and a compact flowering footprint matter. Its 100-watt output is better matched to a small area than to a broad tent with a large plant count.
Spider Farmer SF1000D LED Grow Light: Best for a simple 2x2 ft setup
- 100-watt LED output
- 3x3 ft veg and 2x2 ft flowering footprint
- Samsung LM301B diodes
- Waterproof LED board
The SF1000D gives a small tent grower full-spectrum light with a no-fan design. Its stated spectrum includes blue, 660–665nm, 3000K, 5000K and IR.
Pros
- 2x2 ft flowering footprint
- No-fan zero-noise design
- Large aluminum heat sink
Cons
- No dimming feature stated
- 100 watts is aimed at smaller coverage
The Spider Farmer SF1000D is another compact 2x2 ft flowering choice, with a 3x3 ft veg footprint and 2x2 ft flowering footprint. It uses 100 watts and has 600 LED light sources.
The larger veg area reflects how young plants can use spread light well. Once the canopy fills in, the tighter flower footprint becomes the safer guide.
Its spectrum includes blue, 660 to 665nm, 3000K, 5000K and IR light. That range covers germination, veg and flowering in one fixture.
The no-fan design, large aluminum heat sink, protective cable covers and waterproof LED board make the fixture a simple choice for growers who do not need advanced controls. Simplicity can be a benefit when you want fewer parts to manage.
The SF1000D measures 12.4 x 11.02 x 2.12 in and weighs 3.2 lb. It mounts from the ceiling and uses corded electric power.
The matte black body and aluminum finish suit a tent interior and help the fixture blend in. Keep the heat sink clear of dust so it can shed heat as intended.
Choose this model when you want a quiet, small-tent fixture with a broad spectrum. It suits a single plant or a small group in a 2x2 ft flower area.
The main trade-off is that no dimming feature is stated, so hanging height becomes more important when managing light intensity. Raise the light for seedlings and lower it only as the plants can use the closer intensity.
VIVOSUN LumaLight 200W LED Grow Light: Best for smart dimming
- 200-watt LED output
- 25% to 100% dimming
- 3000K, 5000K, 660nm and 730nm spectrum
- IP65 waterproof and dustproof design
The LumaLight suits growers who want four-level dimming and possible GrowHub or mobile-app control. Its white, blue, red and far-red spectrum covers seedling through harvest stages.
Pros
- 25% to 100% dimming
- Smart-control compatibility
- IP65 waterproof and dustproof design
Cons
- GrowHub is sold separately
- Its 9-pound weight needs secure hanging
The VIVOSUN LumaLight 200W is the best choice here for growers who want dimming with possible smart control. Its four-level dimming range runs from 25% to 100%, and it is compatible with the Vivosun GrowHub and mobile app, sold separately.
The four steps make it easy to match output to plant size without fine tuning. You can start lower for seedlings and step up as the canopy grows.
The 672 LEDs use white, blue, red and far-red light at 3000K, 5000K, 660nm and 730nm. That combination is intended to cover the plant cycle from seedling through harvest.
Far-red light is an extra part of the spectrum that some growers value during flowering. It is one reason to look beyond white light alone when comparing fixtures.
The fixture is 23.5 x 11.8 x 2.95 in and weighs 9 lb. Its iron body has a metal shade, and VIVOSUN includes a pair of US-patented rope hangers.
The IP65 waterproof and dustproof rating suits humid grow rooms and easier cleaning. You still need to follow the manual for spraying and electrical safety.
Choose the LumaLight when remote scheduling or manual multi-level dimming is more useful than a basic on-off fixture. Confirm that your hanging supports can safely handle its weight before installation.
The GrowHub and app are sold separately, so budget for them if smart control is part of your plan. Without them, the knob still gives you four manual levels.
KINGPLUS KingLED KING1000 Grow Light for Indoor: Best for mode switching
- Fits 2x2, 2x3 and 2x4 ft tents
- VEG and BLOOM switches
- Built-in fans
- 460nm, 660nm and 3000K–5000K light
The KING1000 offers several small-tent coverage choices and simple on-body VEG and BLOOM switches. Built-in fans move air through openings in the LED panel.
Pros
- Fits several tent sizes
- Simple VEG and BLOOM controls
- Hanging kit and power cord included
Cons
- Not dimmable
- Built-in fans may not suit a silent grow area
The KINGPLUS KingLED KING1000 fits the same small tent group as the BESTVA DC1000, with 2x2, 2x3 and 2x4 ft coverage. Its VEG and BLOOM switches make stage changes simple, but the fixture is not dimmable.
The simple switches suit growers who want stage control without a dial or app. You set the mode, adjust the height and let the cycle run.
The full spectrum combines blue 460nm, red 660nm and white 3000K to 5000K light. It covers germination through flowering and fruiting in one fixture.
Built-in fans move air through openings in the LED panel, which may help refresh air around the leaves but adds fan noise to the setup. That airflow can be useful in a still tent, but it will not replace a proper exhaust fan.
KINGPLUS includes an adjustable hanger rope, metal hanging kit, power cord and LED grow light. Having the hanging parts in the box saves a separate purchase.
The white metal fixture measures 12.2 x 8.46 x 1.85 in and weighs 3.6 lb. Its compact body is easy to centre over a small tent.
Pick it for simple mode switching and a supplied hanging kit. It is a good fit if you prefer controls on the fixture itself.
Choose another model if quiet operation or fine brightness control is a priority. The fans and fixed output make it less suited to a bedroom grow than a fanless dimmable light.
VIPARSPECTRA LED Grow Lights for Seed Starting: Best for compact dimming
- 150-watt LED output
- 3x3 ft veg and 2x2 ft flowering coverage
- Dimmable
- White, 3000K, 5000K, 660nm and 730nm LEDs
The XS1500 Pro fits growers who want a 150-watt fixture with dimming and a small flowering footprint. Its optical lens design is intended to keep light distribution even across the coverage area.
Pros
- 2x2 ft flowering coverage
- Dimming and daisy chaining
- Aluminum heat sink
Cons
- Daisy chain supports up to 20 lights
- The 2x2 ft flowering area is smaller than its veg footprint
The VIPARSPECTRA XS1500 Pro fits growers who want a compact fixture with dimming. Its stated coverage is 3x3 ft for veg and 2x2 ft for flowering, so use the smaller area when planning a flowering canopy.
The 150-watt LED uses white 3000K, 5000K, red 660nm and IR 730nm light. That spectrum covers the full cycle from seed starting to flower.
Its optical lens design is intended to keep the PPFD distribution even across the coverage area. Evenness matters most at the edges, where plants can lag if light falls away.
VIPARSPECTRA includes the LED light, power cord, 2 stainless steel hooks, 2 rope hangers, a dimming cable and user instructions. The included hardware makes setup easier on day one.
The aluminum fixture measures 14.2 x 11.4 x 3.1 in and uses 450 light sources. At 2.55 kg, it is manageable for a small tent frame.
Choose this fixture when you want a small flowering footprint with a dimmer and the option to connect up to 20 lights. Daisy chaining can help a larger setup stay on one control.
The trade-off is that the flowering area is smaller than the veg area. Plan plant count and spacing for the 2x2 ft stage rather than the wider early stage.
Dimming helps you start seedlings at a gentler level and raise output as plants grow. That control is useful in a compact tent where height options are limited.
KINGPLUS KingLED KING2000 Grow Light for Indoor: Best for 3x5 ft tents
- Fits 3x3, 3x4 and 3x5 ft tents
- VEG and BLOOM switches
- Built-in fans
- 6680-lumen maximum output
The KING2000 is the broadest-coverage pick in this group, with tent footprints up to 3x5 ft. Its VEG and BLOOM switches keep control simple, but it is not dimmable.
Pros
- 3x5 ft tent fit
- VEG and BLOOM modes
- Built-in fans
Cons
- Not dimmable
- Built-in fans add moving parts and sound
The KINGPLUS KingLED KING2000 is the broadest-coverage choice in this roundup. It fits 3x3, 3x4 and 3x5 ft tents, making it more suitable for a larger rectangular space than the small-tent fixtures.
That range helps if your tent is closer to a 3x5 ft layout or if you want room for a wider canopy. Always check the fixture size against the tent width before you commit.
Its full spectrum combines 460nm blue, 660nm red and 3000K to 5000K white light. It supports plants from germination through flowering and fruiting.
Built-in fans move air through the panel, and VEG and BLOOM switches let you select the stated modes. The switches keep control simple, but the fixture is not dimmable.
The KING2000 uses 200 watts, has a maximum light output of 6680 lumens and measures 15.35 x 11.02 x 1.85 in. At 6 lb, it needs a firm hanging point.
The metal fixture hangs from the ceiling and includes an adjustable hanger rope, metal hanging kit and power cord. The included kit reduces the need for extra parts.
Choose it when your tent is closer to 3x5 ft and you prefer simple controls. It suits a grower who wants one fixture to cover a larger footprint.
It is not dimmable, so plan the hanging height and mode selection before the canopy fills in. That planning matters more in a larger tent where you cannot easily move the light once plants are in place.
How do HPS fixtures compare with these LED alternatives?
HPS fixtures use a lamp, reflector or hood and ballast, while the products here are integrated LED fixtures. That difference affects heat management, setup parts, electrical planning and how you adjust the light during the plant cycle.
With HPS, the lamp is a replaceable part with a defined life. As it ages, output can fall, so growers often track lamp hours and replacement timing.
LED fixtures do not use a replaceable discharge lamp in the same way, and their output and heat depend on the diodes, driver and heat sink in the housing.
An HPS system can make sense if you already have compatible hardware and a ventilation plan. It can also suit a grower who prefers a familiar reflector and hood setup.
An LED fixture can be easier to match to a small footprint, especially when it includes dimming or separate growth modes, which can help with seedlings and with a canopy that changes size over time.
Heat is the other big split. HPS hardware can warm the tent air near the lamp, while LED fixtures still release heat from the driver and heat sink.
Electrical planning differs too, as HPS needs a ballast matched to the lamp, while LED fixtures use their own drivers and draw listed wattage from the wall.
Read what does a light ballast do before choosing an HPS setup. The ballast is part of the lighting system, not an optional detail to ignore after selecting the bulb.
For either technology, the flowering footprint should drive your choice. A fixture that matches the tent and canopy will usually beat a larger fixture hung at the wrong height.
How should you choose a grow light for cannabis?
Choose by the flowering footprint first, then check dimming, spectrum, heat planning and hanging space. A 2x2 ft flowering area points toward the SF1000, SF1000D, TS1000 or XS1500 Pro, while a 4x2 ft area favors the TSL2000.
For a small tent with multiple layout choices, the BESTVA DC1000 and KINGLED KING1000 both cover 2x2, 2x3 and 2x4 ft tents. The BESTVA offers a fuller set of stated spectrum details, while the KINGLED adds built-in fans and supplied hanging parts.
For a larger 3x5 ft tent, choose the KING2000 or the TSL2000 based on shape and control needs. The KING2000 reaches the larger tent sizes, while the TSL2000 offers 0 to 100% dimming and a 4x2 ft flowering footprint.
If you are still comparing the whole category, our Best Grow Lights For Cannabis guide explains how to match light coverage and plant stages.
Verdict: which alternative should you choose?
The BESTVA DC1000 is the best all-around choice for shoppers who need flexible 2x2, 2x3 or 2x4 ft coverage with VEG and BLOOM modes. Choose the MARS HYDRO TSL2000 for a long 4x2 ft flowering tent and the Spider Farmer SF1000 for quiet 2x2 ft flowering.
Those three picks cover the most common tent shapes in this roundup. The DC1000 gives layout flexibility, the TSL2000 gives length, and the SF1000 gives silence.
Choose the VIVOSUN LumaLight 200W if smart dimming matters, the TS1000 if you may expand with matching lights, and the KING2000 if your tent reaches 3x5 ft. Each one solves a different control or size problem.
For a simple small setup with no advanced controls, the SF1000D is worth a look. Its quiet fanless build suits a single compact grow.
If you want dimming in a compact fixture, the VIPARSPECTRA XS1500 Pro is a strong option. Its 2x2 ft flowering footprint keeps the focus on the mature canopy.
If you prefer switches over a dimmer, the KING1000 and KING2000 keep things plain. Just remember that neither is dimmable, so height does more of the work.
If you specifically need a true HPS fixture, compare lamp, ballast, reflector, ventilation and electrical requirements before buying. These LED picks are alternatives, not HPS lamps.
Match the flowering footprint first, then check controls, heat and hanging space. That order will help you land on the right fixture for your tent.
Our top 3 picks at a glance
-
1
Best for 2x4 ft tents
BESTVA DC1000 High-Yield Indoor Plant Grow Light
9.7/10 our score
See it on Amazon -
2
Best for 4x2 ft flowering tents
MARS HYDRO 300W TSL2000 Led Grow Lights
9.7/10 our score
See it on Amazon -
3
Frequently asked questions
Are these actually HPS grow lights for cannabis?
The products in this roundup are LED grow lights, not high-pressure sodium fixtures. They are included as current alternatives for shoppers who began with an HPS search, with coverage, spectrum, dimming and canopy use compared for cannabis flowering and indoor growing.
What should you compare in HPS grow lights for cannabis?
Compare the flowering footprint, electrical draw, heat plan, reflector or hood design, ballast setup and canopy coverage. HPS fixtures create a different heat and ventilation load than LED fixtures, so tent size alone does not tell you whether a light is suitable.
What is the best LED alternative to HPS for cannabis flowering?
The MARS HYDRO 300W TSL2000 is the strongest LED alternative here for a 4x2 ft flowering tent because its stated flower footprint matches that long layout. For a 2x2 ft flower area, the Spider Farmer SF1000 or SF1000D is easier to size.
Do cannabis grow lights need a ballast?
Traditional HPS fixtures need a ballast to regulate lamp power, while the LED products here use their own LED power systems. Before choosing an HPS setup, match the ballast to the lamp and confirm the fixture, reflector, socket and electrical supply are compatible.
